• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

CJ8 Rear window seal install

gvales

New member
City
Rochester
State
NY
Got my GR8Tops rear window seal to install my new rear slider. I want to make sure I put seal on in correct direction, not trusting how old one was installed because it did leak. Which groove receives the window, larger or smaller one....and does the seal tab go on the inside of cab or outside?
 
I measured the thickness of both cab and window and installed accordingly - i dont remember which way round. Make sure you have some good rounded tools to get the seal installed it's painful to get the corners in.
 
I just used the GR8Tops seal to install my rear window. I bought this tool on Amazon and it worked GREAT to get the self-locking seal in.

IMG_3717.jpg
 
Also, I don’t think it really matters which way you put the self locking side to. I put it on the outside. In hindsight, I would put it to the inside if I had to do it again. I think it would be easier to engage the self locking part from the inside. I had to pull the roll bar out to have enough room to work the seal from the outside!
 
See this thread post #5...

 
Back
Top