• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Curent pics, lets see em y'all!

bigwalton said:
This is from the NE corner of Wyoming, on the way to Devil's Tower National Monument to camp for the night.

Hey Big Walton,
You know what I like about this shot, aside from the cool sunset-
Is that it shows you must have enjoyed that trip (for the most part) as it shows you stopped to "smell the roses".
..Unless you just stopped to take a leak & the camera was handy.. JK! LOL You'll find that I type as I think & it comes out funny -
so I've been told :) :p
Honestly I haven't read the story yet but I'll find the time soon (geez I hope :confused: )
 
my two cents

here's the pic of mine-JC:D
 
MuleCJ8,

Do you have a custom High Pinion rear Diff or was your rear drive shaft out of the vehicle for that picture?

just wondering.

Also what size are those meaty tires?
I am planning on putting 37" or 38" tires on my beast as soon as I can. and yours looks about right.
 
mrmacrro said:
MuleCJ8,

Do you have a custom High Pinion rear Diff or was your rear drive shaft out of the vehicle for that picture?

just wondering.


Naw, that's just one of those limited edition front wheel drive Scrambler's. J/K :D
 
JEEPNJAX CJ8

OK Guys, Here it is - "Finally"... It's been locked away in my garage for six months now while I gave it the once over, but she's finally trail worthy...
 
WHAT NO DRIVE SHAFT!

No the rear is a regular pinon dana 60,but it's rotated since i'm running a cv rear drive shaft and nv4500 transmisson-the tires are super swamper 39.5 TSLs on 10" alliled 32 bolt beadlocks with a 3" back spacing
 
mrmacrro said:
MuleCJ8,

Do you have a custom High Pinion rear Diff or was your rear drive shaft out of the vehicle for that picture?

just wondering.

Also what size are those meaty tires?
I am planning on putting 37" or 38" tires on my beast as soon as I can. and yours looks about right.

That is funny--I was looking at the pic wondering the same thing. Actually I would like to know if the D300 case has been clocked on Mule's Jeep. I hope to clock mine pretty flat to keep that front shaft in the air. Hopefully his is in the stock position.

JEEPINJAX--Any bio on your Jeep? That thing looks clean. Nice job--now get it dirty!
 
Shafted

Yes my transfer case is in the stock location-i'll be clocking it some time this winter and building a new 3/16" thick skidplate-i'll probably have to go to a cv joint front drive shaft too,because with the front revolvers i had to clearance the driveshaft yokes to keep them from binding:D -JC:p
 
HUH?

What do you call that color-it's unusal and gets your attention.-JC:D
 
color

on my computer it looks kinda of cross between pink and plum-JC:cool:
 
a picture that says it all

here's my tag on my scrambler-JC:D
 
Yeah I know that. Ive spent more time on my jeeps than I do on anything else and theres always something that I want to do on them.
 
No the rear is a regular pinon dana 60, but it's rotated since i'm running a cv rear drive shaft

???? Doesn't "Rotating" the Diff make it a High pinion?

Maybe we could get a picture yes?

That thing looks good and sounds Bad _Azz but how about some CURRENT off road (no parking lot/backyard pics) pictures?

Shoot they don't even need to be extreme.

Next weekend I go back to the Nachees for more fun on the rocks and winding through trees.

attachment.php

I cannot wait.

Also I will post some pics soon of the Jeep with the front fenders cut off as well as the new seat and custom rocker guards!

Of course you will have to wait since I will be taking them on the trail :)

Mark
 
Last edited:
JEEPNJAX CJ8

ZACHV,

Here's the story so far... God only knows when it will end...

1985 CJ8 (real clean - so far...)
Full & Half Hard Tops
SBC
Turbo 400
Dana 300 (4.0:1)
Dana 44 F & R w/ Detroit Soft Lockers
3.73:1 Gears
Warn Locking Hubs
Reverse Shackle
SOA
Rear Traction Bar
Waggy Front Springs
RS9000's
BFG Mud's 35x12.50x15
PS & PB's
Long Travel Driveshafts
Custom Nerf Bars
Warn HS9500I Winch

Custom Rear Bumper (in progress)
Custom Two Piece Rollcage (in progress)
 
Last edited:
JEEPNJAX,

nice looking PNW Scrambler.
We should hook up sometime for some "Light Wheelin"
I live in Seattle.

It's always nice to see another CJ-8er in the PNW!!!!
 
Dang Mark...you shoulda posted this in the Potpourri section. Good post. I just happened to see your handle in the body repair section and thought maybe the "bob" was gonna be a body repair.....lol :D

Any way here is mine and JC's at the San Juan Scramble.
 
Back
Top