interesting responses...
Hmm...not the responses I would have thought would have come up but thats good. Let me start here...
The "Army Test" is really a civilian inspection we have to go through in order to have our vehicles shipped. They check for all sorts of things from cleanliness to mechanical functionality. Some things are more to protect the transporter from liability while the vehicle is in their hands. But much is aimed at ensuring no unsafe, illegeal, or dangerous vehicles will be shipped. The part of the test I had the greatest issue with was the parking brake test. For the average, normal car it probablly isn't even a thought. But for mine it posed a bigger deal than you would think.
For the test they have me back my Jeep (V8, 5speed, 4.10s on 35s) onto a 40% incline, set the brake and put the vehicle in gear. The brake is required to hold, even under load, at that incline. I'm sure they do it as a "saftey issue" for the workers that put the vehicles on the ships but seriously? If someone got out of a manual tranny vehicle with it running in gear they probablly shouldn't be working there.
But the reality is that the stock (all rebuilt and working fine) brakes don't have the mechanical advantage required to stall out the jeep given the gearing and the incline. It just sees it as another rock to be climbed.
Would rear dics and intergrated parking brakes improve that?Sure, I would think. But the other thing is I really don't want to put any more effort or money into that CJ AMC20. ven with the FullFloat kit I just don't see it lasting forever. But for now it will suffice.
The other thing is I will be pulling the tranny/Tcase soon anyway and that would be a good time to do what can be done. I will need new driveshafts anyway and this seems a good way to fix the parking break issue.
The Older Jeeps and LandCruisers used a drum style parking brake, not a disc. They were notorious about loosing the seal and allowing gear oil to escape the tcase and coat the parking brake shoes, thus making it useless. Add in mud or water crossings and you see the same basic advantages we all do with drums over discs.
The breaks on most Busses, large trucks and military vehicles are air operated. There is generally no mechanical parking brake per se. The vehicle must reach a certian air pressure (usually about 100psi) before the brake system will function. But it works sort of in reverse. The design normally is applying pressure to the axles via a spring. When air is introduced it pushes that spring and allows the brakes to disengage and movement can happen. Low air pressure, blockage in an air line, or even frozen condinsation can sometimes cause the brakes to NOT release. A truck (or trailer, works the same) will either not be able to move or it may simply drag that stuck tire. But either way that is not really an equal comparison.