• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Fitting doohickey to put temp guage in fluid line?

bigwalton

Alaskan Postal nutjob
FORUM MANAGER
SOA Member
City
Dexter
State
MI
I tried tonight to find a fitting that is basically a T that goes into the fluid line so you can insert the temp sender for an aftermarket temp gage.

I can't seem to find this simple part!!! :banghead::angry:

Anyone know what I should be looking/searching for or a source? I was searching on coolant fitting, temp sender fitting, coolant T, etc.

Grrrrrr.
 
Well, I have the sending unit, I need a place to put the thing in the line.
 
There should be plugs in the intake manifold you can take out and get a part to change the size to your sending unit. I did mine, There was a plug about the 5th cylinder I was able to use for temperature sending unit for a separate after market gage.
 
If you will p/u a Chrysler cast thermo housing from either a 2.5 or a 4.0 you will have a plug to remove and install the sender directly into.
 
I just went to Lowe's and got a 90* fitting from their plumbing department, screwed that into an existing plugged hole in the manifold, and then fitted the temp gauge stuff into that. worked great.
 
Wait a minute......

I just went to Lowe's and got a 90* fitting from their plumbing department, screwed that into an existing plugged hole in the manifold, and then fitted the temp gauge stuff into that. worked great.

Mike...Are you working on your stuff again?:confused:
 
Mike...Are you working on your stuff again?:confused:

not quite yet...My plan is to get busy on it once Neil graduates on June 7. Gonna have a bunch of family in town, etc and have been working non-stop on "getting the house ready" if you know what I mean. Oh, yeah, were you down in Hatteras last weekend? I camped at Ocracoke all weekend with a big group of friends and the weather was AWESOME!

Getting back on Eric's topic, I was talking about the chevy 350 in the cherry scrambler that I sold to Dan. IIRC, either you or LittleJohn were the one who steered me in the direction to hook the temp gauge up to the manifold. I'm thinking it was LittleJohn....
 
Back
Top