• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

floor mounted auto trans shifter reccomendations

AdamH

Scrambler Junkie
BENEFACTOR
Gold Member
Lifetime Member
SOA Member
City
Surf City
State
NC
Wanting to do some pre-work in case I need to go the floor shifter route.

727 trans with the factory auto column shift for a 909 trans. As described in my other post having troubles shifting with the cable shift and it seems that no matter the adjustsments I can't get it to shift properly. Still diagnosing if it's a trans issue. If I can't get the cable to work correctly I may go the floor shifter route.

I like the looks of the Lokar floor shifter but not sure of it's compatibility with the tub. What floor shifters work / don't work? I personally do not like the big bulky boxes that seems to be common with B&M.
 
I've seen the Lokar in Jeeps, so it will probably work. Otherwise, I like the Art Carr/Winters shifter. You can choose your shift pattern, for your needs, on theirs too.

 
My '84 tan Scrambler is running a Lokar cable shifter for its 700R4, works fine:thumbsup:

This page has some detail on how I installed the shifter/boots:

https://www.cj-8.com/forum/showthread.php?32726-Spankrjs-1984-Long-Term-Project/page37

The next page has some more information on the floor plate/boot installation.


This link details the cable routing/hooking cable to the transmission:

https://www.cj-8.com/forum/showthre...m-Project&p=290019&highlight=lokar#post290019


It was a pretty straight forward installation. No problems, works great:thumbsup:
 
I've seen the Lokar in Jeeps, so it will probably work. Otherwise, I like the Art Carr/Winters shifter. You can choose your shift pattern, for your needs, on theirs too.


I appreciate the feedback but I am wanting to stick to the minimalistic approach with just a shifter coming through the cover.
 
I was reading about the "original" Lokar shifter that uses rods versus the cables. Any issues yall see with one of those?

http://www.lokar.com/product-pgs/shifters/shifter-product-pgs/auto-trans-shifter.html

part # ATS6727A

I helped install one of those on a turbo 350 transmission in my buddies rock crawling YJ. They work very well. But, the shifter will move with the engine/transmission, since it is bolted to the transmission case. Like the stock Dana 300 shifter moves with the powertrain. Not a big deal. This type of shifter has a very nice solid feel. A little less flexibility with where it will come up through the floor board, as opposed to the cable shifter, but shouldn't be an issue:thumbsup:
 
I think I've got a floor shifter somewhere in the shop that came with the TF999 I got in trade. I'm planning on using the column shifter whenever I get around to doing my swap. I'll nose around and see what kind it is.
 
I'm using the Lokar shifter with the rods and no cables. I'm VERY happy with it. I'm not stock though, 545RFE 5spd auto behind a Hemi. The only drawback is when someone else climbs in and doesn't know to push the button to get it to shift. I've had to replace one of the pins in it. It has always performed well on and off the road and looks good in there.
 
I'm using the Lokar shifter with the rods and no cables. I'm VERY happy with it. I'm not stock though, 545RFE 5spd auto behind a Hemi. The only drawback is when someone else climbs in and doesn't know to push the button to get it to shift. I've had to replace one of the pins in it. It has always performed well on and off the road and looks good in there.

So in my situation it should come through the factory cover correct? I'm not worried about having to cut a hole in it just want to ensure the hole is just on the cover and not overlap on the tub.

Also, which height did you get?
 
I also used an electric switch on the dash to take it out of overdrive when needed. I've got 5 forward speeds on this trans and if there's no way of locking it out of overdrive it will drive you nuts searching for the correct gear while cruising. That will also heat up the trans quickly.
 
Thanks for all the replies. Ordered the Lokar trans mount shifter and am working on the install now.
 
I'm using the Lokar with my 727, I wouldn't trade it for anything else there is. And mine isn't cable either its linkage...
 
Back
Top