Glove box door slider hinge mod for cage clearance

[bigwalton]

IMPORTANT NOTE!!! Pics are from A RIGHT-HAND DRIVE postal Scrambler! Reverse them for a normal Jeep, don’t do exactly what I did.

This came up on my stroker thread and want to share it here. When I did my cage, the a-pillar on my passenger side blocked the glove box door.

I modified the hinges to use a long screw that I installed and then ground the threads off of to allow the door to be unlatched, slid to the right and then opened.

The two hinge pics show the door to the left and right.

 

[bigwalton]

The angle and camera lens make it look like the door might clear the a pillar. I assure you, it does not.

In the partially open pic you can see how off-center the door is after sliding right.

 

[CJ8Rockcrawler]

Damn it... now I need to find my glove box door!

 

[bigwalton]

Found the thread I was thinking of but the pics don’t work now. Simple enough and has the step by step.

Post in thread 'Postal full cage-with a couple twists'

May 3, 2009

How to keep the stock glove box door with a cage

Modified the glove box door today along the lines of something that I saw somewhere online way back when.

Pulled the door off, this is what the stock hinge looks like. The two ends attached to the door hold the riveted pin and the hinge rotates.

I ground off the end of the pin with a Dremel and it knocked out easily with a nail/hammer.

I cut one side of the mount...

• bigwalton

 

[gr8dain]

Ugh. Now if I decide to do this mod, I will need to find a replacement box to make the glovebox useful.

 

[bigwalton]

Added a warning, just in case… these are from a right-hand drive Postal. Reverse the pics for normal Jeeps.

 

[bigwalton]

Ugh. Now if I decide to do this mod, I will need to find a replacement box to make the glovebox useful.

For Mater, I made one up out of plywood and some metal unistrut type stuff because the stock paper box was in tatters.

 

[gr8dain]

For Mater, I made one up out of plywood and some metal unistrut type stuff because the stock paper box was in tatters.

Yeah, the paper board one in the scrambler fell apart as soon as I touched it years ago.