• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

hard shifting Dana 300

Colin2151

Legacy Registered User
City
Oswego
State
NY
ok, I guess im use to the " good life " when it comes to using modern t cases and their smooth operating. But now, being a Scrambler owner for the first time I see its not so easy.
I have the SR-4 tranny and the Dana 300 mated to the 258 - 6. Once the hubs are locked in, Iv noticed that alot of times its takes more then alittle effert to get that transfer case into and out of 4HI and 4 LO. Sometimes rolling alittle helps, sometimes not. Sometimes 2 hi to 4 hi are easy, and sometimes their not. Iv tried it with the Clutch in, with it out, truck moving, truck sitting still, most every combination you can think ok... SOMETIMES they work, and Sometimes its a real pain to get into a position. From what Iv been reading, this is NOT an uncomon issue with these older trannys and T cases. Id love anyone input.

Thanks..
Colin :crazy:
 
Just this past weekend I read a ton of posts on this same subject. Mine is no different. The best advice I read from those was that it has to do with driving on road. And to make it shift out of 4wd is to get into a gravel area and goose the gas and it should make it easier. A little snow should work as well. I will definitely try it this winter. Sometimes last year it took a lot o effort to get mine back into 2wd. Hopefully this trick works.
 
I've owned my Scrambler for over 8 years and have been dealing with that issue the entire time. I've found that a few well chosen profanities help.
 
For me, shifting from 2-hi to 4-hi is generally while driving down the road...see a slick patch coming up and shift. Grab the handle, constant pressure, goose the gas pedal slightly. It slides right into gear as my foot comes off the gas.

From 4-hi to 2-hi is the exact same procedure. Constant pressure...goose the gas.

When I say constant pressure, I am not talking gorilla strength here. Just a bit of pressure.

I think the "modern" systems use a heavy spring. When you shift, you are not really engaging the t-case; you are loading a spring that applies pressure to the "real" shifter.

Now, getting into 4-lo is a different story. You have to be stopped and then constant pressure on the shifter. Once you begin rolling, it should slide right into gear...
 
So you actually shift into & out of 2-4 hi on the fly? at what speeds? Just wanting more info instead ot trying it & see peices on the road behind me...... :evil:
 
So you actually shift into & out of 2-4 hi on the fly? at what speeds? Just wanting more info instead ot trying it & see peices on the road behind me...... :evil:

Same here. I have always shifted between 4hi and 2hi while parked. I alway thought it would be safer.
 
I built and put in a twin stick shifter. It's way easier to shift than it ever was with one stick. With either set-up, a slight roll always makes it easier to shift.
 
Agree with John

@ hi to 4 hi is "Shift on the fly". You do have to be stopped when going to 4 low, although as John said, a little "roll" always seems to help. I had the same results as John when I installed the twin sticks. Everything seemed to mget better. :thumbsup:

:wave:
 
@ hi to 4 hi is "Shift on the fly". You do have to be stopped when going to 4 low, although as John said, a little "roll" always seems to help. I had the same results as John when I installed the twin sticks. Everything seemed to mget better. :thumbsup:

:wave:

Thanks everyone for the input. Now I KNOW its not just some issue I have. Iv noticed a slight rolling at least seems to help.. Sometimes....
 
Great feedback , thanks people... Sounds like we've all been there... Just a matter of getting use to how the 'ol Scrambler prefers it to be done...
 
I've all but forgotten 4-high, it's so hard to get in and out of. 4-low isn't nearly as tough, but it is still tempermental. I know it has gotten worse over the years, but even 25 years ago, it wasn't easy.
 
Back
Top