• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

How do I mate a TF999 to 4.0 L ? Automatic kick down linkage?

wmcurryjr

KS JEEP
City
Salt Lake City
State
Ut
Hi,

Can somebody help me? I have a 4.0 L conversion currently mated to a T5 manual 5 speed.

I want to convert to an automatic transmission TF 999.

I cannot for the life of me find any reference for converting the automatic kick down linkage and throttle linkage for any manufacturer including Lokar, etc.

Please help or give me some direction.

Thanks, Wally
wallaceandkaren@yahoo.com
307-448 7342
 
The linkage or cable for a 904 will fit the same.
 
I would suggest contacting Rudy at Rudy's CJ's (racinrudy here). He has a blurb on his website about converting CJ's from manual to automatic.
 
If you want to use the original linkages best to find a donor . Theres lots of little pcs,blockoff plates and brackets.
 
The concern is the fuel injection as the throttle is offset and rotates laterally on fuel injection not front to back on a carburetor ? I have all the linkage for the 4.2 L carburetor model but don't know how to adapt to throttle body/fuel injection throttle cable?

Let me know. Wally
 
I'd look at a YJ from 91-95 and see how they did it. The YJ's with 4.0's used the TF999 too.
 
I would think you should be able to make the Lokar cable work. Not your exact swap but I just used one in my '84 CJ7 that I swapped an AMC 360 in w/ the TF999 along with the Ididit column cable shift linkage and it worked great. Definitely much simpler than the original linkage. With the cable, the lateral movement of the throttle won't be an issue since you can route the cable to follow along with the 4.0 throttle cable. Hesco also offers a cable type linkage for the TF999 but I don't have an experience with it. You might email/call Lokar & Hesco, they may be able to give you specific answers.

Lokar kick down cable p/n: KD-2904HT

https://www.summitracing.com/parts/lok-kd-2904ht

Hesco cable p/n: HES686ATPARTS

http://www.hesco.us/products/7579/m...c-transmission-kit-hes686atparts#.V4f5X6JLB5A
 
Any reason you don't want to go with an AW4? Find the right year (I used a 97) and all you need is a clocking ring/spacer to mate it to the D300 and you gain overdrive.
 
Both Great Ideas! I will look at Lokar and Hesco. I already have a TF999 and didn't want to spend any more money if I didn't have to for a AW4. Will the AW4 work with the column original column shift? Thanks, Wally
 
Back
Top