• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

How to drill holes in windshield frame and sheetmetal

JohnnySix

Legacy Registered User
City
Arlington
State
VA
I'm installing the windshield channel for a bikini top and also installing the wooden side rails. I want to do this right (goes w/o saying) and keep everything looking clean and tight.

My questions are:

1) Is there a special drill bit I should use? And at a certain RPM range?

2) After the holes are drilled, should I paint/treat the newly exposed metal to prevent rust?

3) Any other pointers,tips, tricks, etc.?


Thanks for the help.
 
Use a good sharp bit - I think the ones I have are colbalt and intended for drilling thru steel. Go slowly and use a drop or 2 of oil (sewing machine oil, 3-n-1 oil, etc) as you drill. This will reduce friction and heat. Don't push the bit til it starts to smoke or change color. Should go pretty easy.

A drop of paint or primer around the hole won't hurt either.

:cheers:
 
Thanks for the tips. Took your advice and came out real nice. Did the bikini top, now moving on to the rails. :fingerscrossed:
 
Back
Top