bobbysjeep
Legacy Registered User
- City
- Charlotte
- State
- NC
I followed Dennis' lead on this project but thought I would share in a separate thread for future reference. Not much to it.
I used some engine degreaser in a few spots to clean some grime off the mat, then washed with Dawn dish detergent and let dry. Next, I used a small foam roller to apply the M.E. Millers tire paint. This left little foamy bubbles so I used a clean rag to wipe the excess off. I only put one coat and it dried quick. This stuff feels like a thin coat of rubber and it's thin enough to soak in and not just sit on top.
I read several good reviews from tractor restorers who use this stuff. Anyhow, here are a few pictures.







I used some engine degreaser in a few spots to clean some grime off the mat, then washed with Dawn dish detergent and let dry. Next, I used a small foam roller to apply the M.E. Millers tire paint. This left little foamy bubbles so I used a clean rag to wipe the excess off. I only put one coat and it dried quick. This stuff feels like a thin coat of rubber and it's thin enough to soak in and not just sit on top.
I read several good reviews from tractor restorers who use this stuff. Anyhow, here are a few pictures.







Last edited:

Good luck on your quest to find one in the wild! They are out there....