• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

looking for a summer job fixing jeeps

I personally think you never stop learning things when it comes to projects. I have worked in many shops and have many different projects and you never know everything. also technology changes so u have to be on top of that also.. thats what great about this forum you can pick peoples brains and learn old ways and new ways ... basically it all comes down to picking up a wrench and start taking things apart.. then you will learn if this life is for you.. its not really about the work its a way of getting your mind off the outside world and building somthing that you dreamed of.. frame off or run what you brought.. its a jeep. Start small. recondition one that needs some work..

Sent from my SPH-L900
 
Last edited:
Eliot and I have been in contact and trying to work something out for one of the weeks I take off each year, the main one being the week before the PA Jeeps show in July. Ive also asked him to tell me what weeks are best. And yes I do have a regular job and I can't take off a ton of time but we are seeing I we can work things out someway.

I agree to the above as well. It all takes more time than you ever imagine. Most of these things are old, finicky, rusty and worked on by people that mess things up prior to you getting your hands on them. Only if u told me you had unlimited funds and I could buy every single part brand new and then add 20% for the poor quality and fitment of some of the aftermarket junk could I ever pinpoint the true time it takes to build a jeep from the ground up. After all, they don't call it an estimate and it not be an "estimate" - by the true definition of the word, its subject to change.
 
After working on Jeeps for almost 50 years now, the one most important thing I have learned is, I learn something new almost every time I work on one.

My seven day build took 2 years. That was with everything new and in the shop before we started on it. Problem is, all new parts aren't what they used to be. Neither is your health. 2 heart attacks while doing the build. Keep optimistic, but be realistic. :wave:
 
Well I'm supper pumped for this. lets set a date an ill dive up there and start the fun.
I could use you for at least a week maybe two right now. I'm not that far from you, seriously need the help to finish
 
Eliot, looks like you may be very busy for awhile. :thumbsup: :wave:
 
Well… It definitely sound like I will need to readjust my time frame, however with the support of my friends and family I am still motivated to prove you all wrong. I understand that this goal is both outrageous and impractical but your doubts just motivate me even more. DO NOT UNDER ESTIMATE MY DRIVE, FOCUS AND ABLILTY TO COMPLETE A PROJECT.

With that said I also have much to learn in very little time. After all i have LITTLE JEEP EXPERIENCE and NO WELDING EXPERIENCE. I don't have an extensive knowledge under the hood of cars and There are finical strains but not as much as you might think.

I am going to buy the cheapest scrambler i can find ($2000-$3000) and go from there with the support of my parents. I except the challenges that go along with a jeep that is extensively rusted such as this. I will work hard and fast and learn on the fly if I have to.

My question now is, what things Should I focus on learning before I start the project and what things are easy to learn on the fly.
 
On the fly: removal and replacement of parts. Monkys can do this. A simple chitons manual can drive you through this part.
NEED to learn electrical. There is now way around it.
Patience: these older jeeps have rust busted off screws/bolts.
Need a good teacher with patience as well
 
If you think youll have to weld and you want to weld yourself. Do yourself a favor and take a welding course. Its an art that takes a long time and lots if practice to get good at.
 
What type of scrambler are you looking to end up with? Many times buying the cheapest one to start with and doing all the work yourself is NOT the least expensive way to get a scrambler......
 
What type of scrambler are you looking to end up with? Many times buying the cheapest one to start with and doing all the work yourself is NOT the least expensive way to get a scrambler......

Messaged Eliot earlier, I think he is on the right track. Hope everything falls into place. :wave:
 
If you think you'll have to weld and you want to weld yourself. Do yourself a favor and take a welding course. Its an art that takes a long time and lots if practice to get good at.

Unless your Sam Sullivan. Then you watch a novice (me) make a couple of stick welds, then sit down and do perfect weld after perfect weld. WITH A LINCOLN 225! :wave:
 
Its so hard to guess what could be done without knowing what scrambler you will be building. If you could get a scram that does not need everything for example has a good drivetrain you could save thousands. If this is a true frame up restoration nut and bolt it can take a year of diligent work. I usually have at least two or three parts jeeps around to help my builds.

We also don't know what tools you have. Also what your parts budget is. Like others have mention most have spent years learning all the tricks to working on these old jeeps.

I admire your determination. Reminds me of me when I got my first Heep. It was a bucket of rust and I learned a ton on it. Still 17 years later I could work circles around that kid and do much better work.
 
As far as tools, my father has agreed to lend me anything i want from him and he will buy me any tool i need.

As far as what kind of scrambler i want to do:

The jeep
• daily driver
• safely pull my boat
• Handle moderate off-roading
• Comfortable(ish) highway driving

modifications
• Disc brake
• Removable back seat
• 2-3 inch lift
• 1 inch body lift
• lockers
• 33” tires
Along with others that will help the day to day function of the jeep without changing the appearances (I will need recommendations here)

restoration
• Repaint and clean everything (top to bottom)
• cut out rust sports Weld in new steal
• new plastic parts and interior
• Re build the motor & powertrain (with appropriate barring, seals, ext.)
 
i emailed the guy a couple of time but he still hasn't gotten back to me... I'm going to keep hounding the guy!!!
 
Sorry to hear. Something will turn up.:wave:
 
As far as tools, my father has agreed to lend me anything i want from him and he will buy me any tool i need.

The real question here is, is your dad interested in adopting a 59 year old new son?
 
Back
Top