• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

LS1-SM465-Aluminum Scrambler Build

cjcrazy8

Basic User
City
Cincinnati
State
oh
Alright guys, I thought I would start a thread on my build. Here are some pics of what I did over the weekend. The body is on the rolling chasis which has custom alcan springs with 6" lift on scout 2 d44s with 4.27 gears. detroit soft locker in rear and EZ in front. Both axles completely rebuilt. Front uses dodge outers and brake sys. Rear has a custom disc conversions using geo tracker rotors and eclipse calipers with external p brake. Body mounts have 1" lift. Tires are 36x12.5 TSL on simulated beadlocks (for now). I am in the process of stripping down the LS1 and cleaning it. All my buddies tell me "You are on the freakin moon!"
 
Looks very familiar!:D Even down to the tail lights.
P1010005-1.jpg


BTW, from someone who has been there, ditch the 465.;) It just doesn't do that motor justice, IMO. I switched to a 400 and have happy ever since.
 
I think I have found a solution to mating the LS1 to SM465. That tranny has served me well, but it would be nice to find a GM NV4500 that would bolt right to it and the t-case
 
Update

Positioned the motor and fabbed the mounts. Have the engine tranny and tcase bolted together without the flywheel and clutch. I need to buy a extended pilot bushing from Novak and find a 6.0 flywheel. The 4.3 had the right thickness but the wrong bolt pattern. Going to start wiring this week. The new harness is all black wiring, which in hindsight was not the best Idea.
 
Bear Claw said:
Two things that should never go together.^^

:D HAHA, It's really not as bad as it sounds. The rotors are supprisingly large and the calipers stop a car that is heavier than the jeep. Most of the breaking will be done by the front rotors which are full size dodge.

I just found out that I was making things to complicated with the tranny and engine. I talked to a guy at NOVAK and he said that all I will need is a 5.7 153 tooth flywheel and to not fully seat the pilot bushing in the crank.

On a sad note the guy programming my ecu just called and said that the ecu is not 98 and will not work with my harness. Time to call those silly guys at the junk yard. (......i wonder if there is a reason they are called "junk yards".........God please don't let this be an oman)
 
Last edited:
Posting in hopes of seeing this reborn :(, I missed the original build.
 
I am trying to post pics of before and after (shudder) but the file size is to big and I don't know how to shrink them down
 
What a combination LS1 & Alum Tub.....that thing ought to jump from rock to rock:bow: I-want-to-drive-it-I-want-to-drive-it!:D
 
Back
Top