• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

My De-Rustification Project

I never paid much attention to these tube frames but it does start to grow on you after a while.
 
Too bad you're cross country or I'd find a way to make that happen.

Just what you need Randy, something else to stray your attention. Being ADD like me is not a day at the beach. And to think I have seven vehicles and am carrying full coverage on all of them. I'm a idiot and a addict.
 
Using a template from Randy, I drilled the holes in the frame for the front shock towers. Slow and steady.

Now I need to order the inner frame coating stuff.

ed973abc2d4dec4c5cee29af7e729281-1.jpg


And yes, the Homer bucket inspired me today
0bf6bd4add6eb4d042b967f932dbc014-1.jpg


All the way through
30adff6369077f776f5764f3c5da0b28-1.jpg
 
Great template👍👍👍👍

Sent from my SM-N910P
 
Glad that template worked out for you. I should have made copies, but just like taking pictures, I forgot until after it was too late.

I believe there is a sleeve inside the frame for each of the three holes. Keeps the frame from crushing when the bolts are tightened. Would be easy to do, just cut tube to fit inside the frame and work them into position through the large hole. Use something like another bolt or a dowel to hold the tubes in place from the back while installing the shock tower bolts from the front.
 
Last edited:
Glad that template worked out for you. I should have made copies, but just like taking pictures, I forgot until after it was too late.

I believe there is a sleeve inside the frame for each of the three holes. Keeps the frame from crushing when the bolts are tightened. Would be easy to do, just cut tube to fit inside the frame and work them into position through the large hole. Use something like another bolt or a dowel to hold the tubes in place from the back while installing the shock tower bolts from the front.

Thanks. Seems doable. As for the template, I kept it. So if you want copies made, I should be able to do it.
 
Last edited:
So my wife calls me at work today to ask what Jeep part I ordered now. I guess the inner frame paint arrived early. Woot. Now I need to make the time to coat the inside of the frame this weekend.
 
Painted the inside of the frame today. Next up is the outside. Any suggestions on what to use?
0cbf23258283cd2221a1c55a8a46bbbf-1.jpg
 
I finally got to try out the sewer drain cleanout to clean the insides of the frame tube. It works just fine but I wish I would have bought the 1/4 inch one instead because it would fit through most of the existing frame holes. I first ran it through with air and then rain it through with it attached to my pressure washer hose. It's a little messy but it does exactly what I had hoped it would do. This could be the answer to cleaning out the frame tubes. I may even try building a paint pot so that I can pressurize the pot and attach about 15 ft of hose with the nozzle on the end and try to coat the inside of the frame tube with a good coating. When I'm completely finished with this it may be something that can be passed from one member to another. Then again the 1/4 inch one only cost about $18,00.
 

Attachments

  • 014827.jpg
    014827.jpg
    163.1 KB · Views: 114
I finally got to try out the sewer drain cleanout to clean the insides of the frame tube. It works just fine but I wish I would have bought the 1/4 inch one instead because it would fit through most of the existing frame holes. I first ran it through with air and then rain it through with it attached to my pressure washer hose. It's a little messy but it does exactly what I had hoped it would do. This could be the answer to cleaning out the frame tubes. I may even try building a paint pot so that I can pressurize the pot and attach about 15 ft of hose with the nozzle on the end and try to coat the inside of the frame tube with a good coating. When I'm completely finished with this it may be something that can be passed from one member to another. Then again the 1/4 inch one only cost about $18,00.

That looks like it would work well. I used my air compressor to blow out the frame. Since someone had already prepped it before, it was in really good condition.

The eastwoods inner frame sealer stuff had a tube with a brass fitting on the end that causes the spray to coat all around. I hope it did the job. Hard to tell since I could not see inside as I was spraying.
 
Yes , but I don't exactly have to clean it very often

That's right. Mine is a daily driver that sees winter salted roads. Maybe I can do something about that now that we have a JKU as well. But probably not.
 
Back
Top