• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

My De-Rustification Project

That was one of the regrets that I had with my old 7 I put together a long time ago. The paint looses it's luster after a few years. I wish I had powder coated the frame instead for sure.

Sent from my SM-G920V
 
That was one of the regrets that I had with my old 7 I put together a long time ago. The paint looses it's luster after a few years. I wish I had powder coated the frame instead for sure.

Sent from my SM-G920V
Powder coat sure looks great but my big issue with it (especially with a daily driver in the rust belt) is that once it is chipped or scratched down to the metal it tends to flake off in big sheets.

I'd paint it with epoxy paint.
 
Keep the opinions coming. By the way, I put a couple of coats of primer on today. I will flip it and do the bottom tomorrow night (hopefully)

b2e9b67bdde5e239ca3e92ff8635628a-1.jpg
 
Why would you drive a Scrambler as a daily driver in the snow and salt? That's what JK's or XJ's are for.

Sent from my SM-G920V
 
oil base brush on for me, can touch up if need be. I have a wood splinter i panted 15 years ago that it is still on it and it sits outside..
 
Why would you drive a Scrambler as a daily driver in the snow and salt? That's what JK's or XJ's are for.

Sent from my SM-G920V

My wife would kill me if I drove her JK in the salt... that's what old beaters are for! (sorry for the hijack!)

 
Go to Tractor Supply and get their implement paint. It's not Pebble Beach Concours but for your purposes and 90% of us it's way more sufficient than we'll ever need. Since you've already primed it you're already kind of "painted" into a corner, no pun intended, as to what product you can use from this point forward.
My .02
 
Since the frame came primed already, I did not want to strip it. I really needed to make sure that the newly welded on body mounts and cross member got some attention.

I will look at what brush on paints I can get. I will look at tractor supply. Thanks.
 
Yep , forgot I had it
I'm sure there is enough for you to paint the frame
I'm working in fair Lakes tomorrow, can you break away and come get it during the day


 
Yep , forgot I had it
I'm sure there is enough for you to paint the frame
I'm working in fair Lakes tomorrow, can you break away and come get it during the day

I don't mind getting some on my own Jim. I appreciate it though. Keep it for touch ups if you need it. Thanks.
 
Picked some up today. Also put on another coat of primer. I should be painting the black this week.
 
We make Reverse Osmosis units (salty water) and frame rot on those is a big problem. One system preferred was to blast the frame, spray with phosphoric like you would a fine paint, wet spray zinc primer (we call that Cold Galv) over here then powder coat. The idea is the phosphoric stays active underneath and prevent worming rust in the case of a chip and the zinc being metal is the only "paint" that can stand heat of the pcoating process.
Frames that have been ROing for years still look brilliant.
 
Last edited:
Back
Top