• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

New to me 84' Scrambler

Fast forward to August 2022... I was approached with the chance to buy a Dana 60/44 set off this guy that had them in a commando and I jumped at the opportunity. The axles came with 4.56 gears and a detroit in the dana 60 and a spartan locker in the dana 44. The dana 44 also had 30 spline RCV's. Both axles were narrowed down to 63", so these would fit perfectly in my Scrambler. I got in touch with Independent4x in Ashland, VA to develop a plan for my build and here's what we came up with:

Swap in Dana 60/44 axles
Keep existing 4.56 gears
Add ARB's front and rear
One ton steering
Bilstein 5100 shocks
Custom Anti-wrap bar
Currie anti-rock sway bar
Ford shock towers
Yukon drive flanges
1.5" Rubicon Express spring over
3/4" M.O.R.E Shackles
M.O.R.E 1" forward steering box
@CHIEFWAHO frame stiffeners
Adam's front and rear driveshafts
17x9 Raceline Monster beadlocks
37x12.5r17 Cooper STT Pro's

I dropped my jeep off with Independent4x in late December and after some roadblocks, trips and stumbles, the final product is absolutely perfect. I can't figure out how to post more then 1 picture at a time, so excuse the number of posts :-)
 
Independent 4x /Ryan is good people and a friend. I live about 20 minutes away from the shop. JeeperDD/Dustin works there occationally.
 
Independent 4x /Ryan is good people and a friend. I live about 20 minutes away from the shop. JeeperDD/Dustin works there occationally.
Yessir! Ryan and everyone there are good people. Dustin definitely had a hand in my build as well.
 
Back
Top