• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Oriental Red Original Paint refresh with NOS

I really enjoyed reading your thread this morning from its inception. I appreciate the quality of your efforts to use original equipment; you're my kind of Scrambler aficionado! I'm also learning a bit as I go, which captures my interest.

I cannot think of much that was asked and not answered in this thread, other than the hood footman loop query. The hood footman loop change to rubber coated carried through into 1983 and still had exposed screw heads.

Also, it seems that the hood rests changed between each year '81 thru '83; neither the former or latter model years resemble the "all rubber coated" rests you had pictured on page 4 in a previous post. Additionally, the '83 model contains a "nut-base" on top-side unlike the '81 or your pictured '82 rests.





Lastly, the 1981 model year hood latches contained a hex-head bolt anchor to the fender, and a Phillips Round head screw anchor to the hood catch (maybe a #4 or 5 size Phillips?).

 
Last edited:
Great to see builds like these instead of taking an almost perfect original and hacking it up. I'd love to get my hands on some of those NOS parts!!! I did score a NOS voltage gauge a few months ago and now the rest of the gauges in my dash look like turds.
 
Mark,
Here's picture of both styles of the hood / windshield bumps that Jeep used on CJ's.

I'm not certain what year the changeover of bumps happened.

The ones you pictured with nuts on top are aftermarket.

The 82 Oriental had the full rubberized bumps. Nuts never had wrench on them.
The PO never spent any money on the Scrambler, even the spark plug wires, hoses & belts are original.

Glad peeps are enjoying this freshn' up of a Scrambler.

If you like NOS parts & accessories ....Stay tuned for more. :)

photo12-1.jpg




Footman loop was also rubberized, but I don't know if the 2 phillips were exposed or covered at one time or not.
 
Here's picture of both styles of the hood / windshield bumps that Jeep used on CJ's.

I'm not certain what year the changeover of bumps happened.

The ones you pictured with nuts on top are aftermarket.

The 82 Oriental had the full rubberized bumps.

Thanks for the info. I suspected that the '83 bumps may not be original, since the hood latch and catch are chrome with common anchors and the hood insulation was removed, but I was reluctant to believe someone would swap-out such a minor part just for a little more chrome accent.

Anyway, if my '81 has all-steel bumps and footman loop and your '82 has rubber-coated of the same parts, I assume the change was made in 1982.
 
Does anyone know where one might find a set of the rubberized bumpstops and footman loop that would be appropriate for an '85 Laredo?
 
Found a product that will help Scrambler or J Truck..... AMC Jeep logo'd bedmat owners.
photo1650-1.jpg


Antique tractor buddy told me about it. Makes rubber look as it should...satin.
He says the stain lasts long time and doesn't crack or peel off.

I used tire cleaner and pressure washed with steam cleaner.

Mixed ME Miller tire stain with half water, used about a pint of the concentrate.

Here can see just starting to brush the tire stain on:

photo454-1.jpg


Finished after day of drying. Looks fantastic !

photo1326-1.jpg
 
Been looking for rear 81-84 Smooth Black Denim "fixed" seat to match the NOS front covers.

Was going to settle for nice used rear seat but found these covers NOS :)

I had given a nice rear fixed seat away to a CJ-7 buddy, and WillTX hooked me up with nice rust free Black Laredo fixed.

I've installed the covers on front seats and took Laredo covers off and took rear seat to get ozoned for couple weeks.

Now I gotta decide to drill holes for rear seat ...or not...in nice refurbished bedmat from Jersey Jeeps.

KGrHqJhgEYgzkwYBQFELJ7Yyw60_57-1.jpg


photo682-1.jpg


photo752-1.jpg
 
My suggestion would be to take the mat out when the rear seat is in and find some carpet to put down in the bed so you don't have to drill that nice mat! I had a OEM Jeep bed mat for my J10 but I just couldn't convince myself to cut it to fit around the OEM roll bar feet. I ended up trading it to Jersey Jeeps for his nice J10 Laredo that dosen't have the roll bar.
 
What's up with that smooth black NOS rear cover? I passed on it on ebay. I couldn't figure out that color. Was that another color option besides the typical SR black seats? They look more gray. Sweet score for a matching set.
 
An ozonator does something with the ions that cause odor. It will neutralize the ions to eliminate the odor. I am not scientific by any means and probably spelled most of that wrong. Alls I know is ive used portable units before to eliminate dead rodent odors from attics or walls and they do an excellent job. Never tried it on upholstery before. I assume RM' covers have a musty storage aroma.
Just a guess

We basically seal off the area plug in the machine when nobody is present and the next day wa-la. No dead mouse smell.
 
Last edited:
Interesting, apparently an industry I'd never heard of before. The idea of taking the covers to some mystery location for a couple of weeks for this is fascinating to me for some reason.

Do they just have a big room with an ozonator running 24/7 that people stick things in to de-stinkify? Wild. Sounds like a good line of business. You sit in a small room next to a big room with one of these jimmyjammers in it and charge people to go in and out of it. Brilliant.
 
To drill or not to drill is always a decision that I have hard time with.
From the very beginning of CJ-1 prototype & AgriJeeps there was drilling involved to mount Jeep SE accessories.


Are you considering mounting the seat rear facing or removing the bulk head?

I doubt I'll ever remove the bulkhead as might scratch the beautiful interior paint.
My kids are small so will probably mount forward facing, and could easily mount rear facing.
On my modified Scrambler, before I GASP... Rino lined it... I welded OEM 1" square nuts and moved seat rearward to just fit a 48 Qt. cooler :)


What's up with that smooth black NOS rear cover? I passed on it on ebay. I couldn't figure out that color. Was that another color option besides the typical SR black seats? They look more gray. Sweet score for a matching set.

IIRC... The smooth Black Denim was 81 to sometime in 84. Yes they are more gray than black. See pic below of my little girl in the 82 with seat that had never been removed... before I started cleaning it.

Ok, I'll ask, what's this mean/what's involved/what's it for? :confused:

Jeep Addict sumed ozoning up.
Really cool quote on second day of digging thru dusty old stash... "Nothing like the smell of NOS in the morning."
All part of extreme cleaning the Oriental.
Most of the better car make ready guys (used car detailers) have ozone rooms. Car with windows down overnight gets rid of smoke and funk smell.... but smell will come back in few months especially when hot.
I leave seats in there and they get ozoned lots of times.
I've also had whole Jeep done.
Been explained to me that ozone kills the bacteria.

photo1167-1.jpg
 
Rear seat & covers are smelling like new car.

Going to probably be next summer when its 100+ degrees and couple weeks of basking in the sunshine... before the wrinkles come out from being folded for 30 years.

photo1319-1.jpg

photo827-1.jpg
 
Wow! :drool: Love this I come back to it every few weeks to admire this like new 30-year old Scrambler.
 
Back
Top