• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Proportioning Valve question and looking for restoraton tips

sevensandeights

sevensandeights
City
Mckean
State
PA
I pulled the OEM prop. valve off my 1981 Scrambler with non-power brakes. I want to put it on the 1983 Scrambler I am resto-modifying. I plan to use power brakes on the 1983 (either stock or Navajo). First, will I need a different prop. valve when going from manual to power brakes (will still be disc in the front and drum in the rear)?

Second, any tips to cleaning up my prop valve? Anything I should avoid (like a sandblaster:thumbdown:)? Recommending degreaser/cleaning solution for brass?

Thanks!
 
I'm using my OEM valve with the Navaho set-up. It works fine.
 
On my red Scrambler, I cleaned the proportioning valve with brake parts cleaner, and then lightly sanded it with fine steel wool. I was careful to not let junk fall inside any of the many holes, worked pretty good:thumbsup:
 
Back
Top