• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Random Post Thread (aka: increase your post count here!)

Status
Not open for further replies.
mysunnshine said:
It's now time to start building the little Jeep..... YAY



fbb3c062f7469f0f1edc1afaa023c2ff-1.jpg


Sent from my SM-G920V
Click to expand...

01-04 Rubicon or 450 Foreman?
 
axle.jpg

Picked this up last weekend. Off of a very rusty 54K mile CJ-7
 
mysunnshine said:
1996 400 Foreman

Sent from my SM-G920V
Click to expand...

Ah, should have guessed with that squared off frame.

You can swap front disc brakes off of a 500 foreman, will bolt right up if you get the knuckles, hub/rotors, and calipers. Pretty sure a 450 cylinder and piston will bolt right on too if you wanted to up the power a bit.
 
I might swap the cylinder once the project is done. I'm just using the motor for my Jeep project for my boys....Every thing else I'm going to sell off.

a0a435a3f3047f140dc7efc32841d42e-1.jpg


Sent from my SM-G920V
 
Yeah, wasn't sure if you were gonna try to put all that under the Jeep. Going to build a custom frame and axles or ???
 
Yea....Now that I have a motor, I have enough dimensions to build a frame. I already have the axles and a t-case.

092479dd32f89e2115fe16bae14c6c61-1.jpg


Sent from my SM-G920V
 
Yup...Samurai axles and transfer case. I'll probably have to narrow them but I will not know until I start piecing it all together.

Sent from my SM-G920V
 
Status
Not open for further replies.
Back
Top