• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

So I am inheriting a Scrambler......

This is another project in the same barn that I have to work on one of these days.


DSC_0969_zpsmqtqbvtd-1.jpg


One more of where the Scrambler sits waiting for restoration.

DSC_0976_zpse9oglte8-1.jpg
 
.
.

Great story and Scrambler!

Looking forward to following along - please keep us updated on your progress.

X100 on keeping it as original as possible. Would be a great one to take your time detailing it after removing from the barn using caution to preserve as much OEM equipment as possible.

.
.
 
I still have a condo in Louisville. Born and raised there. Where do you live?
 
Very nice. Definitely needs to be cleaned up, but probably won't take much to make that a real prize.

Clean it up, replace battery, fluids, hoses, and belts. Rebuild carb, clean out gas tank....maybe check brakes over. With 10K on it the drivetrain should still be golden.

I would keep the original belts and hoses etc that you remove too. They're AMC marked.
 
Very nice. Definitely needs to be cleaned up, but probably won't take much to make that a real prize.

Clean it up, replace battery, fluids, hoses, and belts. Rebuild carb, clean out gas tank....maybe check brakes over. With 10K on it the drivetrain should still be golden.

I would keep the original belts and hoses etc that you remove too. They're AMC marked.

Sounds like a good plan to me!!! :thumbsup:
 
Following this build as well. I lived in Okolona for a couple years and sadly sold my first Scrambler their. It is really sad because he was going to chop it and build a rock crawler but I had to feed the kid and make the house payment. 😭😭

Keep it original as can be, this is truly an awesome find.

Jim, we can work on building mine, I am a lot closer to you and know we're close to original, just saying.
 
I'm pretty sure everyone knows I'm kidding
Z, if you ever need any help let me know, I'd be more than happy to lend a hand
 
Yes I know you are joking with his Scrambler, but I will be hitting you up soon. Just got mine into the garage this evening to get a few items taken care of for some summer driving.
 
This is amazing. If I were closer, I think I would pull up a chair, pop open a cold beer, light a cigar and just stare at it! I guess I'm strange.
 
you'd be surprised how many would probably trade you a built 8 for your stock one - definitely leave it as close to stock as possible. Cant wait to see that paint cleaned up!
 
you'd be surprised how many would probably trade you a built 8 for your stock one - definitely leave it as close to stock as possible. Cant wait to see that paint cleaned up!

When I first started thinking about this project I thought I would pull the original motor and trans rebuild them and drop in a SBC. The more I think about it the less likely it is that I'm going to do that. What you cant see in the photos is that there is very very little rust. the rear bumper is a bit twisted, one of the quarters behind the drivers door, and the tail gate lip is bent, and a corner of the fiberglass top got ripped off and that's it for the body damage.

All in all not much really needs to be done to it to get it road worthy and back in top shape.
 
Back
Top