• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Somewhat off topic, 05-06 rubicon Q?

LT1scrambler

Basic User
City
Cincinnati
State
oh
2005 and or 2006 Rubicons, I am curious which automatic transmission is installed in them. I know they are overdrives, but who manufactures it? Is it a good durable auto tranny? Has is ever been installed in any other jeep line with a good track history?

Also would anyone know if this newer 4.0 litre 6 cyl in the Jeeps have a roller cam installed or are they just a simple flat tappet? I can't seem to find any internal engine specs on this engine. Thanks, Larry.
 
As far as I know the 4.0L remained basically unchanged throughout its use.

The later models have a main bolt girdle for strength. The lower bolt mounting points are thinner leading to broken block mounting point on the pasenger side after an impact. The newer heads have a smaller intake runner. They did some work with graphite coated pisonts to try and limit psiton slap and noise.

Most things were to reduce noise and vibration. But apart from removing the fuel pump boss from the 258 to 4.0L change and deck heights there really was not that much changed. Oh, They also made provision for the coil on plug stuff in the later castings.

The issue with a roller cam is that there is not a clear area where you can run a bridge between the intake and exhaust lifter to keep the roller wheel perpendicular to the cam lobe. There are some aftermarket ideas but none really seem to work.

Best way to make a 4.0L have more power is to Stroke it. And there are a lot of different recipes on that, but mostly they are the same. Well you can supercharge or turbo it. But those are a little more drastic. Espically if you are looking for power down low. Best for that is to stroke the engine with a good RV cam.

Carl
 
Thanks, that is excellent info on the engine. I was hoping when that engine was redesigned they would go to a roller style camshaft since most manufactures already have. I am not a big fan of the flat tappet cams, especially now that the quality of oil is diminishing.
Now if I can find someone knowledgable about the auto trans that is used in the 05-06 models I will be set. I am guessing that it's probably much like the 6 cylinder. Not changed much over the years and has a proven track record.

I have driven the 6 speed version, I have to say I am not impressed with the gear spread on this trans. For a trans to have 6 gears I would have expected more overdrive in 6th gear but the darn thing was spinning around 2300 rpms at only 55 mph, no wonder they only rate these things at 19 mpg highway, it would be screaming at 65-70. I am guessing 6th gear must be only .80 overdrive or there abouts. Yuk. The overdrive in my 6 speed Z-28 is .50 and it's nice on the highway, even with alot of rearend gear, I was hoping the new jeeps would be similar with the 6 speed :(

Anyway, I drove an Automatic version, also with the same 4.10 rearend ratio, and it seemed to be much more relaxed at 55 mph only turning about 2,000 rpms once in 4th gear and the converter locked up. I am just curious how durable these automatics are. I am not familiar with auto overdrives from Chrysler.
I am not too thrilled about doing clutch jobs on a 4X4 either, too much crap to remove. Changing trans fluid at regular intervals is much easier :) Any input or experience with these would be great, thanks, Larry.
 
LT1,
Never drove the 6 speed, but what you said makes sense and I'd probably not enjoy it much

Good engine info..

Clutch jobs...Other than having to actually pull the tranny and t-case, clutch jobs are nothing. Swapped in a T-176 into my '81 laying on my back and sliding out and back in with the tranny and t-case on my chest. Not recommended, but it was the circumstance and a fair accomplishment. I learned patience (line-up) and endurance (holding it in mid-air forever. This leads back to my personal belief that you can do far more with a stick than a slushbox. Plus.... I enjoy being totally involved with my Jeep ALL the time.
Paul
 
Ya I have done clutch jobs on my wifes CJ's in the past, I just don't care to do it on 4X4's if I can help it, just getting tired of it. I figure if I am on the market for something else I may go auto just to avoid the headache, but I am uncertain of the durability of these new auto trannies.

I am more use to messing with 60's and 70's muscle cars and lifting muncie's in and out. I just did the clutch on my Z-28 with a 6 speed, but there really isn't much to it, and I shouldn't complain, I have a lift with a tranny jack.

I like the idea of having the 6 speed as I prefer to row my own, but I did not like what little overdrive it had to offer. I would assume it's because the 6 cylinder doesn't have enough grunt to lug the jeep around and putting too much of an overdrive in it would probably wreak havick on slight upgrades if the rpms were too low. Going back and forth from 6th to 5th would get annoying. Thats too bad though, that 6 speed would be a nice tranny with more overdrive in 6th gear.

Guess I will search more on the internet and see if I can find any specs on this stuff. Thanks again, Larry.
 
I love my 6-speed Rubicon LJ... the auto is a dog. On the trail with the 4:1 the 6 speed is just sweet.
 
Thanks Walton, you have always been a big help to me here. Ya, I drove the auto version, also with 4.10 gears, and that 6 cylinder just felt sooooo slugish, only shifting at 4500 rpms at full throttle. But for some reason, it seemed to have more overdrive in 4th gear than the 6 speed I drove. The auto dropped the engine rpm to about 2,000 rpms in 4th at 55 mph where the 6 speed was still cruising around 2,300 rpms in 6th at the same mph and same 4.10 gears. I expected better than that out of a trans with 6 gears. I also noticed that 1st gear was extrememly short and that was just in 2 wheel high :eek: I couldn't imagine in 4 wheel low what first gear would be like, that thing would barely creep.

You are right though, it would be nice off road, although I don't plan on doing much of that. And I am still leaning towards the 6 speed if for nothing else just for long term durability. Glad to hear of another owner of a rubicon on here that can give first hand experience with it. Anything about it that you don't like or would like to change? Thanks again, Larry.
 
1st is very low, and there are days where I will cuss it a little. One big thing that helps is that, if I have any roll at all, I start off in 2nd.

Here's the things I think about that 1st that makes it actually a good idea (at least in a Rubicon)

1) This thing is meant to go offroad. Period. If you complain because it isn't good on road, you're not the right driver. ;)

2) If you drive one again, find an uphill in a parking lot and put it in 1st and low :D You have to be gentle with the clutch, it will want to GO. I've creeped uphill on mild rock on the trail at idle. It takes a real rock to stall it out. Most of the time offroad, I'm in 3rd or 4th. I'm not an experienced offroad stick driver (Postal's auto) so I'm still on the steep part of the learning curve when it comes to actually using 1st and 2nd.

3) A Rubicon just screams to be lifted as far as I'm concerned. With most stock setups, once you go anywhere beyond stock tires, you're dogging it on the road and looking a gearing change to add to the cost of that $$$ lift. As I see it, a set of 35s with the 6 speed and 4.10s would put you into a VERY streetable range and still have way more than enough grunt offroad. To me, this was a H-U-G-E selling point knowing that I wouldn't get rid of this (I consider the Rubi LJs to be the next Scrambler when you look at the short run and low production #s, especially since there's no new long 2-door)

As far as other things go... I need skidplates, but that's because I wheel it. The belly hangs too far down. I'll be doing some flavor of body lift/engine lift/flat skidder eventually. I may hold off on this and just accept it until I do a long-arm that integrates a skidder.

Hmmm... other than that, I can't think of anything. We just love it. Kate loves it so much that she's dealing with the 2-door/flip forward seat to get Laura in and out of the back at least twice a day back/forth to daycare.

We got the dual tops and the sunrider sunroof feature on the soft top is just cool. Easy to do quickly for the ride home from work...

There's a boatload of room in it with the rear seat pulled. I got our new TV that wouldn't fit in the XJ back in the LJ. Especially with the hard top, you can really load it up. We've taken a couple of longer trips in it with the baby comfortably.

We like it :D
 
Excellent Walton. We have been looking at Rubicon Unlimited's only, we definately want the longer version in a 2 door. I have seen the 07's and we don't like the drastic body style change so we are stuck looking at an 05 or 06 Rubicon Unlimited. After having a Scrambler I wouldn't have it any other way. I don't mind dealing with putting my son in and out of the back, My wife and I have never owned a 4 door vehicle and don't plan to, even with the family. Always had 2 door vehicles for the last 20 years and don't plan to change.

Tell me more about this sunrider sunroof feature on the soft top. I have looked at quite a few soft soft top unlimited's but I am not sure about this sunroof feature and I have never seen that listed on the window stickers :confused: I am guessing if it has the soft top it has the feature you mention? Just from looking at the inside construction of the soft top, it appears to tilt back like a convertable top on a car,,,,is that correct?

We are definately sold on a rubicon unlimited, we just have to find the right one. Probably end up traveling somewhere to get it as the pickings are slim but thats ok.

I was thinking the same thing about taller tires in the future to help kill some of the gear. Thanks for the input, glad to hear of a happy owner,,,Larry.
 
I do have to say that there was a recall on the cam/dizzy gear and we had to have new units put in only 2 months after owning it. Something about premature wear due to bad parts.

Any of the LJ softops have the sunroof feature. I thought that the Jeep website showed it. If not, grab your 4wd or Quadratec catalog. All of the aftermarket folks make one that does this now. You just unlatch the windshield frame clamps and slide a coupler on a rod just above the top of the doorframe to allow the front part of the top to flip back, opening about 2' of the top right above your head. The rest of the top stays right in place, it's pretty slick.
 
aaaah, ok,,,that makes sense now, I was wondering what those speed nuts were for on top of the door frame ;) Thanks for the insight Walton,,,Larry.
 
If you are looking for aused one there is one listed on our club web site. Go to KC4WDA.com. It looks pretty nice. Its a stick,lifted,30k miles. Its somewhere around Kansas City.
 
Had mine out on the highway today and was paying attention to what I was turning because of this thread...

I was in a hurry, so I can say that it's just a hair under 3000 RPM running 85. :D

At a more reasonable speed, I could do about 70 @ 2700-2800 RPM.

Those were on pretty well level road.
 
Thanks Walton. That engine sure does spin for having 6 gears. It was a little higher than I expected when I test drove one with a 6 speed, kinda surprised me I guess. I was having trouble figuring why a little 6 cylinder was only rated at 19 mpg highway, just didn't make sense to me until I drove it and found how high the motor buzzed in 6th gear just cruising along at even 60 mph. I still like these vehicles though, and I think you are right, sticking some taller tires on it to kill some of the gear is a good idea, plus the benefit of more ground clearance.
I don't think I have seen a rubicon yet that had anything less than 4.10 gears installed on the window sticker. Too bad, I think a 3.73 would be much more liveable on the street since the overdrive tranny doesn't offer much gear reduction. Still very nice vehicles though.

Scramblur, I tried to look at the rubicon you mentioned but it appears you have to be a member to view anything in that website. I was not anxious to sign up to another site so I couldn't view it. Thanks though,,,,Larry.
 
Wonder how much of a hassle it would be to put one of those 6 speeds in my Cherokee. Hafta check out NAXJA and see if it's been done(pretty sure it has)
Paul
 
Well I finally found some specs on the transmissions after some long searching,,,sheeeesh. Anyway, the 6 speed does not have much overdrive to speak of, which is what I suspected. 6th gear is only .82 or .84 depending on which spec sheet you read. 5th gear is 1:1 :( I did find the automatic has a much more highway friendly .69 overdrive which explains why the auto I drove cruised at 3-400 rpms less than the 6 speed version. I would think this would be worth a slight gas mileage increase over the 6 speed, not to mention less wear and tear on the motor. Just thought I would share,,,Larry.
 
The rubicon auto tranny is a 42RLE. I read (on the internet) that the 42RLE is a version (L = longitudinally mounted) of the 42RE used in some other Jeep/Chrysle/Dodge vehicles.

You can find a ton of info about all things Rubicon at rubiconownersforum.com
and they are a great bunch of guys too.

Best regards.

Andrew
 
I think that the 4.10s are a part of the rubicon package, don't think there's any option to get anything else.
 
I think you are right Walton, I have not seen a rubicon with anything other than 4.10's. I have seen 3.73's in the standard unlimited's.

Thanks daddyo, I was curious where that trans originated from. I read where it was called a 42RLE, strange name for a trans. I did find a couple of recalls on the rubicon, and both were transmission related. The automatic recall is for the parking pawl falling off and vehicle rolling away while parked :eek: and the other is for the 6speed hydraulic clutch master cylinder linkage rod breaking.

I am just a little leary of an auto overdrive tranny from chrysler. My father-in-law had a small front wheel drive chrysler that had 3 transmissions replaced under warranty and now that you have told me this 42RLE is basically a version of the front wheel drive trans reconfigured, I am more scared than ever,,,lol. They just don't seem to build the automatics as tough as they used to. Larry.
 
rubicon LJ

I have a 6 speed, love the whole package. Worth every over priced penny I paid for it. I really can not comment on the auto box.

Some observation since I got mine.

It needs skid plates badlly especially engine, control arms and aftermarker gas tank. I also skid the steering box on mine.

Tuff drawer is worth it.

Need to figure out how to bypass the low range locker lock out. I was told how but did not investigate it futher (not paid off yet) Not being able to use the lockers in 4wd high is a bit of a pain.

In stock form I am getting around 18to 19 mpg driven around town conservativelly.
 
Back
Top