• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Spent the day at the range

You know you can convert a series 80 to 70 ...

True, but not a great idea for a carry gun. The liability of "disabling a safety device" could really come back to bite you!

... but I'm more of a Browning Hi power guy. Once you shoot a Browning Hi power, you'll forget about a Glock...

Agreed... the Hi-Power is a great one, but not the only one. My Beretta 92FS out-shoots (in my hands) any 1911 or Hi-Power I've ever fired (and I've fired a bunch of them). I even removed a Colt Commander from my permit in favor of the Beretta, as my every day carry gun!

If you're looking for a good pistol, do your research and pick the top five based on your criteria. Then, find a way to go out and fire at least 100 rounds through each of them, and pick the one that works best for you...

... Chances are, it won't be a Glock....
 
You know you can convert a series 80 to 70 with a conversion shim from brownells. I have done it, it's easy to do, and works great. I like 1911s, but I'm more of a Browning Hi power guy. Once you shoot a Browning Hi power, you'll forget about a Glock...

Yeah, but the reason I specified early 70's series is Colt's quality control really got iffy towards the late 70's. The later 70's series and 80's series were made at a time where it didn't appear that anyone was even looking at the finished guns before they were shipped out. I saw a late 70's series Gold Cup that actually had the slide bored off-center. It would still function fine, but there was a big gap on one side of the barrel, and the other was rubbing the side of the barrel. Some were fine, some weren't, but rule of thumb the early guns were made better.
 
Colts aren't what they used to be, but I think they have stepped up their game a little. I had a Combat elite from 2015, that was put together well. I also have a 2003 gold cup trophy that looks, feels, and shoots beautifully. If I get another 1911, it will probaly be Colt. I know there are better brands out there, but the Colt just has that heirloom feel to it, unlike it's various clones in my opinion.
 
Colts aren't what they used to be, but I think they have stepped up their game a little. I had a Combat elite from 2015, that was put together well. I also have a 2003 gold cup trophy that looks, feels, and shoots beautifully. If I get another 1911, it will probaly be Colt. I know there are better brands out there, but the Colt just has that heirloom feel to it, unlike it's various clones in my opinion.

Oh yeah. Smith has gotten better as well. The mid-late 70's through the mid 90's the quality control was really crappy though. Still a lot of good guns made then, but you better look one over before you buy it.

Agree with you on Colt too. My grandfather had a circa 1918 Colt that was turned into him when he was running a primary flying school during WWII. My uncle got that one.

I still think the late 60's/ early 70's is when the last of the really fine, hand finished Colts and Smith and Wessons were made.
 
Smith and wesson really went down hill, with the introduction of the internal lock safety in the mid '90s. They've recovered from it since, but I will try to keep my support to s&w minimal, until they permanently do away with that evil device. As for Colt, they were still making fine revolvers into the '90s. But an expensive steel six shooter, can't compete with the cheap 17 shot plastic pistols in the law enforcement market, which is what helped keep Colt, and S&W running all this time. Colt was smart, and made a sad farewell to the revolver lineup. S&W on the other hand made a deal with the devil, in exchange for a bailout.
 
I'll stick with the old ones.

01d0a53de791decbf11f77fac3f9236c-1.jpg



 
That is a beautiful wheel gun. Is that a model 19 or 27? The old S&Ws are some of the best wheel guns ever built. My model 19 6 inch, made in the late '70s or early '80s shoots like a rifle.
 
19-4, 6" barrel with 3T's. Dates to 1979.

Good eye.


 
I've got a Series 80 Gold Cup that will get you right between the eyes....with the ejected brass. Hard not to flinch when shooting it. Hot .45 brass can hurt you. Have to check on what year it is.
 
I've got a Series 80 Gold Cup that will get you right between the eyes....with the ejected brass. Hard not to flinch when shooting it. Hot .45 brass can hurt you. Have to check on what year it is.

You could probaly have a gunsmith adjust that. I've never had that problem with mine. There is quite a bit of hand fitting done to these, so someone could have easily had a bad day at the plant, and messed up your extraction, or ejection mechanism.
 
19-4, 6" barrel with 3T's. Dates to 1979.

Good eye.

Pretty. I used to not even look at anything past a -2 on the K and N frames, but now they've gotten scarce and one has to take what one can get.

The early guns aren't ALL good either. I looked at a 27-2 with an early S serial number a while back. Figured it would be perfect, but had a plum colored barrel vs a blued frame and the barrel was actually canted to one side a little.

General rule, early guns are better, but bottom line is if you can look it over closely in person, that's the only way to be sure.

Of course, with the interwebs we no longer look at the Shotgun News/ Gun List, call a guy on the other side of the country, and buy it over the phone sight unseen, and hope it looks good when it arrives. Those were the good old days!
 
These newer classifieds with pictures are nice. I've gotten good deals on gunbroker.com, I've only been screwed once. That was with a winchester 97 that was supposedly in good condition, I received the gun, and it looked like it had been ran over by a bus on loose gravel a few times. However, I bought another 97 on there that was nice. I think I paid too little for it. That was probaly the best deal I got on gunbroker.com
 
Nothing beats a little "Group Therapy".

I'm looking at a Ruger Precision Rifle in 6.5 Creedmore, but I really should buy an engine for my '81 first...
 
I'm looking at a Ruger Precision Rifle in 6.5 Creedmore, but I really should buy an engine for my '81 first...

That's funny that you say that because one of those just came up locally for sale that has only been out of the box for pics. I must resist-
 
I need more room in the safe and I need to finish 2 Jeeps. Unfortunately I shoot less than I use my Jeeps.

Sent from my SM-G920V
 
Pretty. I used to not even look at anything past a -2 on the K and N frames, but now they've gotten scarce and one has to take what one can get.

The early guns aren't ALL good either. I looked at a 27-2 with an early S serial number a while back. Figured it would be perfect, but had a plum colored barrel vs a blued frame and the barrel was actually canted to one side a little.

General rule, early guns are better, but bottom line is if you can look it over closely in person, that's the only way to be sure.

If S&W would get rid of the internal lock safety and start using hammer mounted firing pins again on the K,L, and N frames, I'd probaly buy a new revolver from them. I think the fit and finish on these new s&w guns is good, not as good as the vintage ones, but by modern standards is pretty good. I can live with things like a frame mounted firing pins, but the internal lock safety is the ultimate deal breaker for me. In fact if they just stopped using the internal lock safety, and left the firing pin in the frame, that would be more than enough reason for me to buy one.
 
Back
Top