• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Stainless pre-bent brake lines?

Is it leaking at the rear (rear brake line screws into a adapter fitting) or the front button. If either the o-ring seals are leaking. Been told it can be fixed but the process of taking apart and putting together tears the o-ring. If this is your problem, contact inline tube. Finding a new valve that doesn't leak is hit or miss. If it's leaking where the hard line flare/nut connects to another fitting/line check to make sure the flare has no nicks or a burr. Is so sand smooth and put together. Us brake fluid to lubricate the treads. Because stainless is harder than steel or copper you may have to use more pressure when tightening to get the surface's to compress together to seal.
 
If you are having issues with flare fittings leaking, there is a solution. There are lapping tools that clean the mating surfaces. Read here:

Direct link to Koul Tools:

 
Back
Top