- City
- Lancaster
- State
- Oh
Hi all,
I just got done swapping an MC2100 onto my 258 last night. It came off of my hangar queen 75 cj5's 304. It's a 1.08. I got the jeep to START, but it runs horribly and smokes like nothing I've ever driven (including a '23 T-Bucket with a 289 with dual Holley 600s). I'm sure that the main jets are too large. They're 50s. I plan on picking up a couple 47s and swapping them in. As for the vacuum ports, I plugged every one except the large one on the rear drivers side which I have going to my brake booster and the front drivers side by the air mixture screw is going to my distributor vacuum advance. I took the choke from my BBD, reversed the coil inside, and fitted it to the mc2100 in place of the manual choke that was on the cj5. There was a port on the bottom of the choke that I plugged as well. It will start, but it runs really rough, REALLY ROUGH, and smokes like an old highball train.
Any suggestions besides the bigger main jets?
Any help would be appreciated!
I just got done swapping an MC2100 onto my 258 last night. It came off of my hangar queen 75 cj5's 304. It's a 1.08. I got the jeep to START, but it runs horribly and smokes like nothing I've ever driven (including a '23 T-Bucket with a 289 with dual Holley 600s). I'm sure that the main jets are too large. They're 50s. I plan on picking up a couple 47s and swapping them in. As for the vacuum ports, I plugged every one except the large one on the rear drivers side which I have going to my brake booster and the front drivers side by the air mixture screw is going to my distributor vacuum advance. I took the choke from my BBD, reversed the coil inside, and fitted it to the mc2100 in place of the manual choke that was on the cj5. There was a port on the bottom of the choke that I plugged as well. It will start, but it runs really rough, REALLY ROUGH, and smokes like an old highball train.
Any suggestions besides the bigger main jets?
Any help would be appreciated!


