- City
- Surf City
- State
- NC
AMC 304 - very mildly built - not sure on exact horsepower
TF 727 tranny - no mods
Dana 300 T-case - no mods
GY 35" MTRs
I currently have the factory 2.73s in my axles and trying to decide which route to go on gears. The local shop that will do the work (have done all my re-gearing over the years) aren't in agreement with each other either. A few say 4.10s and others are saying 3.73s. While in there I will have them install a Detroit True Trac in the rear along with 1-piece axles.
This will rarely see the dirt - just being honest here. I'd rather take my JKUR off-road since I look at newer Jeeps as easily replaceable. However it will see the highway - virtualy anywhere I want to go more than 10 miles away from my house involves 1 of 3 highways down here with posted speed limits of 65-70 MPH. I don't want it screaming with gearing too low but I also don't want to be missing out when the random times come when it does leave the pavement such as at my parent's tree farm.
Any experience with the above or similar set-up? I am still chasing a shifting issue I am having with the trans so I have not driven the Jeep on the road much at all plus will need to get it inspected (last year for it here in NC) so no real experience with RPM or power as it sits today.
TF 727 tranny - no mods
Dana 300 T-case - no mods
GY 35" MTRs
I currently have the factory 2.73s in my axles and trying to decide which route to go on gears. The local shop that will do the work (have done all my re-gearing over the years) aren't in agreement with each other either. A few say 4.10s and others are saying 3.73s. While in there I will have them install a Detroit True Trac in the rear along with 1-piece axles.
This will rarely see the dirt - just being honest here. I'd rather take my JKUR off-road since I look at newer Jeeps as easily replaceable. However it will see the highway - virtualy anywhere I want to go more than 10 miles away from my house involves 1 of 3 highways down here with posted speed limits of 65-70 MPH. I don't want it screaming with gearing too low but I also don't want to be missing out when the random times come when it does leave the pavement such as at my parent's tree farm.
Any experience with the above or similar set-up? I am still chasing a shifting issue I am having with the trans so I have not driven the Jeep on the road much at all plus will need to get it inspected (last year for it here in NC) so no real experience with RPM or power as it sits today.
