• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Updating dash?

firemedic90

Basic User
City
Cape Coral
State
FL
After I install a new Painless harness, I'm thinking of updating the dash to something a bit more modern. Maybe a set of nice Auto Meter gauges, some weather resistant accessory switches, a push button start, and maybe a stereo. Has anyone done a total dash reconfiguration like this? If so, some pics for ideas would be great. Also any input as far as anticipated problems with a setup like this or a few of the 1,000,001 things I haven't considered would be appreciated.
 
What are you going to do with the old harness? Couldn't resist, I need one of the plugs from the dash area.
 
It most likely would be sitting in a corner of my garage somewhere. If theres something you need or even the whole thing you can have it. But understand it's hacked, crimped, taped, spliced, twisted, and otherwise not in very good shape. So I can't promise that what you're looking for will even be on it. But I'll keep your name and when I yank it I'll let you know.
 
thinking about doing the same on mine. starting with a blank piece of alum. and putting together myself. i'm not anticipating it as being to difficult except coming up with a layout i'll like. easy enough to get gauges and such from summit/jegs and such from the usual assortment of suppliers. living in a rusty area i'm trying to use as much alum as possible then painting it the color i want.....
 
Aluminum...yea probably a good idea. I'm in Florida so it's pretty humid. Maybe a piece of diamond plate would look cool.
 
Duffy has a nice dash with LOTS of time in it.....

interior_800x600.jpg
 
Holy mackrel thats incredible. I'm not sure I've been that ambitious about anything EVER! Can't imaging what that must have cost. Sweet dash!
 
Try here

There are several good ideas in that thread. There was also a good thread recently on the Pirate board w/ some good pics.
 
I definately like the angled gauge idea in Ken's picture. I wonder if I could make that work through diamond plate.
 
firemedic90 said:
I definately like the angled gauge idea in Ken's picture. I wonder if I could make that work through diamond plate.

You should be able to, they sell those gauge cases at all kinds of different angles. Or if you are into DIY use PVC and cut at any angle you want.

Truck
 
The last Scrambler I bought had a s-w-e-e-t plywood dash overlay. It was very classy... (not really) ;)

JP Offroad sells aluminum dash panels. Clicky. Just another idea for you.

Craig
 
Wow, Duffy's dash is the nicest I have seen! That is something to be proud of! :)

I can offer that i have been putting marine stereo's and speakers in my Jeeps for quite sometime. I won't go back to a non-marine radio for durability in weather.

Lastly, I did run an all Nordskog digital set-up in one Jeep and while it had issues, it was very nice regarding ease of calibration for gears and tire changes. I will also add that the digital readout is quite nice since Jeeps have such "head turning" gauge locations (off to the right). With a glance, you know what numbers you are running. I find common analog gauges distracting in comparison. I used the typical aftermarket stainless dash for most of my rigs...no rust, no paint! (weak, I know).

Rudy
 
You can upgrade to a YJ intrument panel in your CJ :eek: . It's a simple bolt up.:D :D Wiring is another matter:rolleyes:

Paul
 
It is obvious I am no photographer. Here's the only pics of my now gone Nordskog digital dash that was in my Matkins aluminum CJ8 ....

Rudy
 
Last edited:
Back
Top