• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

What gives?

Gueon

Scrambler Junkie
Lifetime Member
City
Thatcher
State
AZ
OK, not to sound like an absolute NOOB, but why is the transfer case shifter on my '81 so much different than the shifter on the '83?

I actually prefer the longer '81 style for what it's worth... Hey, just curious.



 
When the Dana 300 came out in CJs for the 1980 model year it had a few differences compared to the one we see 82-86. It also has a shorter tail housing. And it has that longer shifter. I haven't studied why that is or why they shortened it side by side.
 
I would guess due to the short driveshaft length of the CJ5's that were still in production.
 
Yes I dont think it was a 5/7 thing.. My guess is it was a design change to the Dana 300 shooting from the hip here only knowing that early ones I have parted have had that short tail housing along with the longer shifter. And CJ5 lasted through 1983 with relatively small production run.
 
I think the short tail housing on the Dana 300 for 1980 possibly was just a carryover of the Dana 20


 
When the Dana 300 came out in CJs for the 1980 model year it had a few differences compared to the one we see 82-86. It also has a shorter tail housing. And it has that longer shifter. I haven't studied why that is or why they shortened it side by side.

Great, thanks for the info Eric!
 
On my 80 cj7 the TC shifter is long and it is easy to smack my nuckles on the dash. I wondered why. Thought about heating it up and bending it. That must be why they went to a shorter one.
 
Back
Top