Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
It reminds me of the clamp that hooks to the end of the stabilizer shock up front that clamps to the tie rod that goes from the pitman arm to the steering knuckle?
All good ideas, I'm going to crawl around it today to see if anything lines up with it. I thought maybe it was one of the pieces for the steering stabilizer but nothing in the stack of pictures I took during the teardown look like it. I also thought it might be the under hood light bracket but the holes just barely don't line up. The fact that it's not immediately recognizable makes me think it's something the PO added to hold or prop something up. He did have a piece of angle iron serving as the trans crossmember after all.
The holes look wallowed out... like it was a back bracket for something... like on the other side of the tire carrier to support the bed from collapsing... like they didn't have the original one so they made this. I don't recognize it though from anything I have taken apart... the bottom edge looks like it was welded to something and then it was cut off or bend back and forth till it broke off
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.