• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

What should I use for tail lights?

AK-RWC

Legacy Registered User
City
south central
State
AK
Title says it all. I'm thinking LEDs. I like flush-mounted lights. I don't like the factory-style lights. It doesn't look like there's enough room to flush-mount round lights above the fuel fillers without hitting the seam where the inner sheetmetal comes up for the tailgate support. Anybody have any brilliant ideas? I'm not a big fan of the oval trailer-style lights, but that's what I might end up with by default.

l_86eecc8f75944ab7996047e268739b56-1.jpg
 
savvy off road has semi flush stock ish LED tail lights..

Clicky

1249530325865492654051jpeg-1.jpg
 
I installed a set of the Savvy lights...they look great IMHO... There's pics in my build thread.

They install just like the factory lights... but with a bare tub you can put them wherever you want.
 
What'd I miss...

Sorry for the steal here but I gotta read your thread....I missed something...
fillerS? as in two of them.....hmmm.
As to the lights, I concur with the ones posted. You may also look at RoundEyes and Trucklite for LED sources. Search around their sites and look at other ideas. The flush round ones are pretty easy but you will have to incorporate reverse and/or blinkers in other areas maybe.
 
Title says it all. I'm thinking LEDs. I like flush-mounted lights. I don't like the factory-style lights. It doesn't look like there's enough room to flush-mount round lights above the fuel fillers without hitting the seam where the inner sheetmetal comes up for the tailgate support. Anybody have any brilliant ideas? I'm not a big fan of the oval trailer-style lights, but that's what I might end up with by default.
hid light kits
l_86eecc8f75944ab7996047e268739b56-1.jpg

Whatever you end up going with I definitely agree with you on the LED's
 
I like the idea of the HUMMV lights, and I've seen them installed in a TJ, but they're WAY too big; not only would they interfere with the dual-tank fillers, but they don't leave any space for the CJ-8 or AMC/Jeep emblems.

I went with 4" LEDs by Maxxima:
http://www.maxxima.com/products/pro...Stop/Tail/Turn Surface Mount Light/view/.html

They surface-mount, so I only had to drill the three mounting holes, plus a hole to run the wires. Mounting them upside down allowed me to only drill one mounting hole into the interior area. I clipped the factory plug from my busted and worn-out factory housing, and re-used the back-up light slot of the plug for the ground. I'll run the back-up lights probably on the bumper, whenever I figure out what I'm going to do for a bumper.

l_4a6c536e8d8149b69ab2fabf8d2f6817-1.jpg
 
Pick up a digital flasher at your local parts store when you get a chance. With out the digital flasher your turn signals will look like strobe lights. Learned that one the hard way years ago. LOL

Looks good btw!:thumbsup:

Later
Sean
 
resistor diode pack

I got a resistor/diode pack from Autozone for about $10 & made my own that fit into the lighting plug for my trailer wiring. With a trailer on the lights blink normal. I leave the pack plugged in when I am not pulling a trailer & they blink normal. Also I have heard a heavy duty flasher might blink normal but have not tried it.
 
tail lights

if you want something differant and or want to see differant types check around for street rods tail lights tons of differant shapes and sizes out there you just have to do a little digging
 
Back
Top