• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Fender flares???

Fender flares...attached or separate???

  • already attached

    Votes: 4 21.1%
  • separate pieces

    Votes: 15 78.9%

  • Total voters
    19
  • Poll closed .

jeffs396

mini Scrambler
City
NE
State
OH
Would you like the fender flares on your resin body already attached, or keep them as separate pieces???
 
jeffs396 said:
Would you like the fender flares on your resin body already attached, or keep them as separate pieces???


if their the correct flares attached would be great:D
 
Guess I would prefer seperate pieces with 2 options. Stock and wider after
market style. I'm sure when the kit is available alot of us will be building replicas of our full size versions.:cool:
Keep up the good work man can't wait till you got them ready.:D

Later
Sean
 
I had to create flares for my pine wood derby Scrambler and they were the first thing to fall off.
Also, most people probably won't take the time to modify the model (which would require lift susp., and larger tires), so I say mold them on.
 
attached

It would more cost effective to have them cast in; sanding them off would be easy enough and sheet metal lips could be added easily with Plastruct.

Nice work on the conversion.

On a side note, any way you could cast a better engine or parts for this conversion? Pic shows the generic "blobby" engine from the Revell/Monogram kit with an oil filter on the side of block like a SBC; the timing cover with the oil filter and distributor is from a JoHan AMC kit-- at least R/M got the oil fill in the right spot.
Picture7.jpg
 
That's what the whole thing boils down to really...cost. I'd really like to have a photo-etch sheet made up with all of the emblems, hinges, etc. Also fix all of the kit inaccuracies like the engine, axles with no top to the center section...just to name a few. But the more things I have to have molds made of & cast, up goes the cost. How many actually have AMC V8s in their Scrambler? I bet alot have the six, or SBC, or LS V8s. I too did what you're doing & ground off the cast in oil filter & will use the Johan parts...maybe the whole V8 from a Johan kit. But I'm sure most here aren't as into model kits as you & I are, and if it looks "right", they'll be happy. That's why I'm asking for opinions here. You'll never please everyone all of the time, I'd like to make the thing so it'll look good as is, or if you're into fixing all of the things wrong with the donor kit or want to really modify the entire model, it'll suit everyone's needs! :thumbsup:

Good idea on the Cherokee conversion, there was a guy selling Wagoneers made from the Honcho kit also, haven't seen any lately though.
 
Some of us would find the Chev engine more accurate...:D

Just need a LSx block! :evil:
 
Randyzzz said:
Some of us would find the Chev engine more accurate...:D

Just need a LSx block! :evil:
Hey Randy...this kit has a nice depiction of your 5.3 and tranny:

reissue out currently:
attachment.php


original issue:
attachment.php
 
I can already see that we're going to need a separate forum on here for the models people will be building :thumbsup:
 
jeffs396 said:
Hey Randy...this kit has a nice depiction of your 5.3 and tranny:

Looks good....I'll have to find one of them cheap after I get a body from you. I have heard there are suppliers of countless scale "upgrade parts"...even big tires and winches!

Eric's right...we might need a separate category to show off our models. We could even have a contest! I actually won the local 7/11 model building contest back in the early 70's:D (My hands were a lot steadier then)

I really need to get my real Scrambler running first, before I even start on a model...:rolleyes:
 
Ok....I just found a place that makes 1/24 scale beadlocks out of aluminum!

Must...get...away...from...computer...
 
jeffs396 said:
I've got a couple sets of your cool Western Bullets in scale, too...:D

Save a set for me?
 
Randyzzz said:
Ok....I just found a place that makes 1/24 scale beadlocks out of aluminum!

Must...get...away...from...computer...

There is some really cool aftermarket stuff for model building...a few years ago, the selection was even better...scale modeling is not what it used to be. Alot of the discontinued items are still available on eBay...like Super Swamper tires, etc. These damned kids today, all they want to do is play video games, not build stuff with their hands! :rolleyes:

Randyzzz said:
Save a set for me?

Their yours...I think I've got enough so you can do that trailer, too. Gotta check my stash...
 
I voted seperate pieces for the fact it would make them easier to paint a different color. The Cj-7 model I have now has them molded in.
 
Back
Top