• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

How many "hail Mary"s will it take...

Progress has been slow, but that's OK. We've been busy with other creative projects. A few updates, though.


First, here's a poser shot of Mira with her new (for Christmas) JCR Offroad rear bumper. BTW, do you see the pink bandana she's holding in the first picture? After the rest of the Christmas morning hoopla was done (before we went out to the garage), Mira dug the bandana out of her room, and said she had to be blindfolded before going outside. She wanted the "full effect" when her bumper was unveiled. :D

attachment.php


...and with her new Ballistic Fabrication battery holder. The engine compartment is pretty much empty now. Mira & I removed the engine wiring harness, motor mounts (frame side), etc. The paint in the engine compartment is in pretty nice shape, so it should just be a matter of quickly scuffing, degreasing, and painting it in the spring.
attachment.php


The floorpan patch repair (under driver's feet) is going decently well. I'm about half to two-thirds of the way done. Again, here's the floorpan after cut-out (NOTE: I used 3-M Weld-Thru coating on the frame rails and under the patch panel before welding it in):
attachment.php


Floorpan with fitted patch panel (recycled from part of the old hood):
attachment.php


Floorpan patch partially done (welds ground down & sanded).
attachment.php


I have to say that I MUCH prefer welding 1/8"-3/16" steel. Sheet metal is a bit of a pain. Fortunately, we're not on a pressing deadline.

Mira got to work on a few things over her Christmas break, including removal of some engine compartment bits, and also starting on disassembling the dash. We did find an amplifier under the lower dash panel; we'll have to test it to see if it works, and will use it if it does. NOTE: Despite the bird's nest that's still in the radio opening, no actual birds were harmed during the course of our work. :rotfl:

attachment.php


I also had some PM discussion on Pirate with Dave at Ballistic Fabrication about how happy Mira is with her Ballistic Christmas gifts. He was pleased that she liked their stuff, but that was the extent of the discussion. Then, on my doorstep last week arrived a small package from Ballistic - a kid-sized shirt with a pink skull printed on front, and "Ballistic" on the back. Mira doesn't know about it yet, and I'm going to surprise her with it when I see her on Tuesday. So thank you, Ballistic Fabrication, for sponsoring Mira with this. She's diggin' your products so far. :cool:

attachment.php



That's all for now. More work to come this afternoon after church (I'm itchy to keep working on it)...

Craig
 
I also had some PM discussion on Pirate with Dave at Ballistic Fabrication about how happy Mira is with her Ballistic Christmas gifts. He was pleased that she liked their stuff, but that was the extent of the discussion. Then, on my doorstep last week arrived a small package from Ballistic - a kid-sized shirt with a pink skull printed on front, and "Ballistic" on the back. Mira doesn't know about it yet, and I'm going to surprise her with it when I see her on Tuesday. So thank you, Ballistic Fabrication, for sponsoring Mira with this. She's diggin' your products so far. :cool:

attachment.php
Craig

That is AWESOME! Nice work!
 
Here's Mira sporting her new Ballistic Fabrication shirt (and also a cool stainless XJ sign that I found for her on NAXJA).

attachment.php


Also, after seeing stroaks CJ build on our local 4x4 site, Mira REALLY liked the Synergy Green used on the new Camaros. We'll decide for sure on color down the road, but the Synergy Green is neck & neck with the BBQ black for paint options.

Craig

2010%20Chevrolet%20Camaro%20Synergy%20Special%20Edition%201.jpg
 
Awesome stuff man! Cool sign Mira!

DO GREEN!!!! I tried to talk Kate into Electric Lime Green for the LJ and couldn't get anywhere. There's millions of black cars out there, how often does one that color green come along? :thumbsup:
 
Great build thread Craig, you guys will have a great treasure when you get it done. My son was about 10 when he wanted to help with my CJ5 frame up, in his case the interest didnt last but then, it wasnt his jeep either. I'm amazed, though I shouldnt be, at your forethought starting now and building it togehter, currently they can get a liscence here at 15 i think what is it up your way?

As to the drive train, I agree that everyone needs to learn to drive a stick, I have a brother in law who still cant and is well into his 40s and was an M1 driver in the army before he married my sister (who can drive a stick, she learned how to drive my cj5 into a parking lot light pole to prove it too) but I would suggest the AW4, it's a solid trans, and an auto is way easier to live with day to day, Milieage diffeence is negligable, and you dont have to deal with the darned interal slave cylinder which ofter lasts a third to half as long as the clutch.....

Show her the Dodge Orange equivalent to the GM green, I dont know the name or code but its the same as the green but orange, great color. In fact, I think a couple years ago someone here on this site did an MJ in that color, awesome ride
 
Awesome stuff man! Cool sign Mira!

DO GREEN!!!! I tried to talk Kate into Electric Lime Green for the LJ and couldn't get anywhere. There's millions of black cars out there, how often does one that color green come along? :thumbsup:

I really am digging the green myself! There are a lot of shades that are very "OK", but this color is a home run, IMO. Some of it will depend on cost, which will have to be taken into consideration.


Great build thread Craig, you guys will have a great treasure when you get it done. My son was about 10 when he wanted to help with my CJ5 frame up, in his case the interest didnt last but then, it wasnt his jeep either. I'm amazed, though I shouldnt be, at your forethought starting now and building it togehter, currently they can get a liscence here at 15 i think what is it up your way?

As to the drive train, I agree that everyone needs to learn to drive a stick, I have a brother in law who still cant and is well into his 40s and was an M1 driver in the army before he married my sister (who can drive a stick, she learned how to drive my cj5 into a parking lot light pole to prove it too) but I would suggest the AW4, it's a solid trans, and an auto is way easier to live with day to day, Milieage diffeence is negligable, and you dont have to deal with the darned interal slave cylinder which ofter lasts a third to half as long as the clutch.....

Show her the Dodge Orange equivalent to the GM green, I dont know the name or code but its the same as the green but orange, great color. In fact, I think a couple years ago someone here on this site did an MJ in that color, awesome ride

Thanks for the input, trust. We've actually gone back & forth on the AX-15 vs. AW-4 thing. I do have a perfect-working AW-4 (and donor vehicle) on hand - 198K, and works perfectly.

For the AX-15, I actually helped my buddy part out a '95 XJ, and bought the AX-15, bellhousing with external slave cylinder cut-out, flywheel, clutch, pressure plate, and hydraulic master/slave cylinder all for $100. The bellhousing was the driving force in the purchase. The other consideration is that the engine/AX-15 donor vehicle is a '92 (ODBI), while the auto trans donor is a '96 (ODBII). Simplicity says to use the AX-15 (plus, Mira's XJ was originally an AX-15).

Nothing's for sure at this point, though. The parts market around here is tough, so the AW-4 probably won't be going anywhere soon.

Craig
 
Here is a link to Eastwoods colors that these two are talking about.

http://www.eastwood.com/eastwood-s-69-chrysler-sublime-lime-light-kit.html

http://www.eastwood.com/ew-huggin-orange-3-1-ss-urethane.html

I am partial to Persian Orange but I am an Allis Chalmers fan and then it would match my tractor.


Carl

Thanks Carl. I'm not a fan of that green, but do love the orange! I'm partial to oranges, though...here are a couple supporting photos. :rotfl:

Here's my Steelman 'cross bike. The color is called "Persimon Sparkle". Love it!
steelmanEurocross.jpg


Here's the JK that my girlfriend just bought yesterday. LOVE that color!
P1294433JPG-1.jpg
 
I made some progress on Mira's floor pans. I finished up two small (~3.5" square) patches on the driver side, and started removing the full passenger floor pan to prep it for the full-length replacement pan I bought a while back. I still have to wrap up a little grinding on the driver front foot area.

I also found out last week that a friend/co-worker's brother owns a body shop in Grand Rapids. I'll be talking with him within the next few weeks about getting a quote on the bodywork & paint.

We also sold some more parts this week, and upon selling them, we have a whopping $272.80 invested in the entire project. :cool:

Craig

attachment.php


attachment.php
 
Last edited:
Here's the initial test-fit on passenger floor pan. I still have a fair share of cutting/grinding on the residual edges of the old floor pan, but that's the easy stuff (just time-consuming). Once the final fit is complete, I'll drill a number of small (3/16"-ish) holes to plug weld to the existing floor, unibody frame rail, and inner door sill.

I'm pretty impressed with the fit of the replacement floor pan from Sherman Auto Parts (again, a Michigan-based company :thumb:).

Craig

attachment.php
 
We got Mira's 8.25 rear axle pulled in preparation for the Dana 44 install (it'll be a while, but...). Here's Mira with her "What, WHAT?" poser look. :rotfl:

Craig

attachment.php
 
Well, I originally planned on giving Mira her first welding lesson while welding a Ballistic Fabrication skull on her Dana 44 differential cover. She's with her mom this weekend, though, and I was itchy do do some welding. I'll have her help with the axle bracketry instead, as that'll be coming up before long. I should have my '05 LJ Dana 44 pulled within a week or two in preparation for my D70U install (narrowed CJ-10a rear axle), and will be reworking that with XJ brackets.

So, here's Mira's "hardcore" diff cover after some primer (top coat to come soon). It's stamped with a 1987 date, and is the HD style (1/8" thick). It'll give her more protection than the thinner D44 cover that came stock on the LJ.

Craig

attachment.php
 
The donor '05 LJ rear Dana 44 is now pulled. :woot:

attachment.php


I have the necessary XJ spring perches and shock mounts...just need to get the TJ/LJ brackets removed. I also want to build an axle stand/jig prior to doing this. I'm also considering a T&T Customs truss prior to install, as the LJ D44 tubes aren't overly stout.

TJD44.jpg


Another thing to note is that the pinion length on the Dana 44 looks to be almost identical to that of the 8.25 axle that came out of the XJ, so we should be set with our driveshaft length.

Craig
 
Here's Mira & the Sawzall vs. the LJ Dana 44. :rotfl: We ended up getting the passenger upper control arm bracket and coil bucket removed. More progress to come tomorrow, hopefully. Mira was a trooper today given the heat we've been having here in Michigan.

Craig

attachment.php



Here's my lovely hammer-wielding daughter...love it! :cool:
attachment.php
 
Mira's T&T Customs truss arrived. Here's a glamour shot. :thumbsup: I have the axle about 1/2 "naked". All brackets are removed, but I still have to grind about 50% of the original welds smooth. The truss is a nice-looking piece, and beefy. I'll probably be talking with a local friend (certified welder) about doing the finish welding; I'm not comfortable using my 115V Miller MIG for such thick plate.

Craig

attachment.php
 
Last edited:
Guess what showed up on the door step today? All of this Eastwood product, compliments of Matt at Eastwood. Thanks for the sponsorship, Matt. Mira & I both appreciate it greatly! :thumbsup:

Craig

attachment.php
 
We ordered, and just received our H.D. Offroad Engineering XJ Shackle Relocation Kit a couple days ago. I stumbled across this set-up over on NAXJA. Because we need a little additional height in the rear (the front will have 2" BB spacers, and this kit adds ~1-1.5"), and to get a better shackle angle and better articulation, I ordered up the kit from Brian over at H.D. Offroad Engineering. There are some offerings from other companies, but this looked the most stout and heavy-duty to me.

Here's what the pre-installed set-up looks like:
attachment.php


Just because I'm a perfectionist :rotfl:, I rounded off all the corners with a grinder & sander, and prepped the shackle relocation kit and the T&T Dana 44 truss for paint. I primed all but the bottom 1/2" of the truss, which will get 3M Weld-Thru primer. I wanted the inside of the truss to be well-protected from the elements.
attachment.php


After the first coat of Eastwood primer...
attachment.php
 
Back
Top