• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

How many "hail Mary"s will it take...

This just in...Mira was published in the January 2012 issue of Jp Magazine. Woot! I'm very proud that they complimented her writing/grammar/punctuation. That's my girl!

forum
 
That is too cool. You must be one proud dad!
 
That is too cool. You must be one proud dad!

Very much so, Randy!


Just got my copy in the mail today.

WAY TO GO, MIRA!!!

Thanks Cincyjeeprs!



Maeve (Mira's little sister) actually helped me out in the garage today, and was a great little helper! She liked watching me weld, and seemed pretty interested in the process. She, of course, laughed at me a couple times I forgot to connect my ground wire prior to welding. :D Anyway, here's the progress.


Front view of Mira's completed (minus paint & replacement "skull" diff cover), disc-braked, trussed Dana 44 rear axle.
302238_2664622624711_1530388062_32706546_1453753102_n.jpg


Close-up of front of truss. I welded a couple 7/16" nuts on the inside on both sides of the center section as a mounting point for a potential differential skid plate down the road.
302238_2664622704713_1530388062_32706548_282422224_n.jpg


Close-up of passenger-side Dana 44 rear. The M.O.R.E. shock mounts gain us about 1" of additional ground clearance over the stock shock mounts.
302238_2664622744714_1530388062_32706549_652286169_n.jpg


Another center section shot. I cleaned up & painted the inside of the truss, and also the top of the cast center section prior to welding on the truss so it'll be easier to seal up from the elements.
302238_2664622784715_1530388062_32706550_1494238627_n.jpg


On the rear of the truss, I drilled a hole, and welded (from the back) a 7/16"-20 bolt to mount the OEM '05 LJ brake line splitter. The little tab below is just to keep the splitter from rotating around.
390961_2664663385730_1530388062_32706581_470791603_n.jpg


Here's a close-up of one of the truss welds. I did a double-pass weld with my Millermatic 135...worked very well. I haven't done many double-pass welds, but given the thickness of the material, it was the best route to go with my 115V Miller welder.
390961_2664663425731_1530388062_32706582_1933569752_n.jpg
 
Wow!! , hope I get that good at welding ,
I am possibly looking for a rear 44 from a 87-90 Cherokee for this possible project myself, he is 10
91 yj 4.0ho
47b2d8a58e919419-1.jpg

47b2d8a58eada8d5-1.jpg
 
Wow!! , hope I get that good at welding ,
I am possibly looking for a rear 44 from a 87-90 Cherokee for this possible project myself, he is 10
91 yj 4.0ho
47b2d8a58e919419-1.jpg

47b2d8a58eada8d5-1.jpg

Thanks, and very cool about the (potential?) YJ project for your son. :cool: I had an XJ Dana 44s previously, but it was disassembled and needed a full rebuild (and all brake hardware). It worked out much more easily using my low-mileage LJ Dana 44 since the gearing was right, and it already had disc brakes. I'm looking forward to getting it painted all purty-like. :cheers:

Craig
 
I started on Mira's "poor kid's (and dad's) heavy-duty control arms" tonight (stock LCA on the bottom, newly-plated LCA on top). I bought $4 worth of 1 3/4" x 3/16" plate today, and welded one piece to the bottom of the stock LJ control arms. I stitch-welded them a little at a time to minimize warping. The grinding is just the initial pass...it'll look better once I'm done.

388397_2692967253309_1530388062_32716660_1343897632_n.jpg
 
Drat...I realized that the stock control arms will NOT work with the JKS mini skids I already welded on the axle. I'll need to get aftermarket LCAs after all. If I hadn't put the JKS mini skids on the axle, this would have been a good idea, IMHO.

Craig
 
That sucks. eBay those things! I love the idea for a good quick fix for some added strength.
 
That sucks. eBay those things! I love the idea for a good quick fix for some added strength.

Bleh. I don't deal with eBay anymore (for a couple reasons). I'll just hold on to them, and maybe just finish them if someone I know can use them.

Craig
 
Trussed Dana 44 almost done...currently in primer. I hope to have paint finished this week (the Eastwood primer/paint requires 24 hours between coats). My perfectionist ways are killing me...I have a couple blemishes on top of the truss that I'll probably re-sand & re-prime. Nobody will ever see it when it's installed, but it'll bug me if I don't fix them.

378393_2720159773105_1530388062_32724007_1090593534_n.jpg
 
This just in...Mira was published in the January 2012 issue of Jp Magazine. Woot! I'm very proud that they complimented her writing/grammar/punctuation. That's my girl!

317480_2612966533341_1530388062_32686549_1160393374_n.jpg

Nice work. I was just at work the other day and picked up the 01/12 edition of Jp. I had seen that picture and remember it from your thread here on the forum "How many hail Mary's will it take..." Having a Jeep Super Star at such a young age must make you proud! keep up the good work.

Drew (7jeeps7kings)

ps. sorry I'm a little late to the game on the post. I don't get Jp magazine at home anymore. and have to wait till my buddy is done with his and brings into work! lol
 
Nice work. I was just at work the other day and picked up the 01/12 edition of Jp. I had seen that picture and remember it from your thread here on the forum "How many hail Mary's will it take..." Having a Jeep Super Star at such a young age must make you proud! keep up the good work.

Drew (7jeeps7kings)

ps. sorry I'm a little late to the game on the post. I don't get Jp magazine at home anymore. and have to wait till my buddy is done with his and brings into work! lol

Thanks Drew. :cheers:


Parts Update:

Here in Michigan, Mira must be excited about sledding season, as her idea for a photo with her new JCR Offroad transfer case skid was to sit on it like a sled. Crazy kid. I took advantage of a Black Friday sale at JCR to pick up this, and a couple other items for Mira as an early Christmas(ish) gift.
374800_2737754892972_1530388062_32730376_1330495000_n.jpg


Another shot of Mira with the JCR Offroad skid, and also a set of their new front Unibody Tie-In brackets that wrap underneath the frame, and tie into the sway bar mounts. These are nice pieces to beef up the front sheet metal where the stock bumper mounts. NOTE that while she's a unique pre-teen in regards to owning/building her own Jeep at age 11, she's completely typical in that her cell phone is never out of her reach. :rotfl:
382811_2738068060801_1530388062_32730470_279277269_n.jpg



Speaking of front bumpers, JCR Offroad unveiled an economically-priced “DIY” front bumper on Black Friday, as well. It’s all CNC-cut, and comes in a tidy little (literally…approximately 12” x 30” x 1”) package. I picked one of these up for Mira, as well.
389799_2738070500862_1530388062_32730472_1378078260_n.jpg



Here’s what the assembled JCR Offroad DIY bumper kit looks like assembled & installed. It should look very nice on her XJ.
379925_2738071460886_1530388062_32730473_583735996_n.jpg
 
We want to give fellow (hometown) Jeeper Ron Peterson (cj8ron) a HUGE thanks for sponsoring Mira's project with a new "facelift" header panel (grill), and several other Cherokee parts that will help Mira's XJ project. Ron looks somewhat stoic in this pic :rotfl:, but we had a good time introducing Mira to him and chatting, checking out his Jeep collection, etc. Thanks again, Ron!

384382_2764581283615_1530388062_32737597_51296586_n.jpg
 
Back
Top