• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

How many "hail Mary"s will it take...

Still getting BBQ black paint??? :rotfl:

Welcome to last year, Eric. :rotfl: Actually, the color choice was/is Synergy Green, which it'll still very likely get. BBQ black was my original suggestion, but Mira LOVES the Synergy Green. The red looks good at 20 feet, but the body definitely has some dings that'll be fixed up eventually.


On a related note, here's little sis Maeve sitting on the hood of her new-to-her 2-door. Big things are in-the-works, and to be announced soon. We bought a drivetrain/interior donor - an '00 XJ Limited - for the 2-door...power/heated leather seats, mint interior, premium sound, etc., but damaged exterior after it hydroplaned on I-75 and kissed the wall...on all 4 corners.

481269_4113175837636_172723691_n.jpg
 
I was quoting from your post though!! :D Neck and neck and I want to see the BBQ black!!! :fingerscrossed:

Mira REALLY liked the Synergy Green used on the new Camaros. We'll decide for sure on color down the road, but the Synergy Green is neck & neck with the BBQ black for paint options.
 
Mira got to work removing the entire interior on her Cherokee today. She started with the seats...
425436_4231687720359_1702341595_n.jpg


...then moved on to the interior trim/side panels, seat belts, etc...
602369_4231687960365_860844460_n.jpg


...and ended up with this. There is one spot on the passenger floor board that will need repaired. I'm glad we pulled the carpet to find it. This Cherokee will receive a VERY nice interior from a low-mileage '99 donor vehicle that we already have.
388994_4231688280373_1994424171_n.jpg



Overall, we made really good progress today. We still have to remove the headliner yet, but that'll go pretty quickly.

Craig (and Mira)
 
Very nice progress. Hope it was cooler up there than here today.

Look forward to seeing you at the "Sand Blast".

:wave:
 
Mira helped me last weekend with a compression test on her '99 XJ engine donor vehicle (94K miles, formerly mechanic-owned). Everything checked out great! So...
427386_4323970227364_1638081817_n.jpg



...the old, rough-running engine was pulled today, and the engine compartment power washed afterward.
268361_4323970627374_854110230_n.jpg



The front axle will be pulled & sold tomorrow, as Mira's XJ will be getting my "old" 53K-mile Dana 30/Dana 44 axles. I hadn't planned on pulling the front axle just yet, but a buyer popped up for the HP D30, and out it'll come.

Craig
 
Mira's project is back underway (WOOT!), but we should informally rename it "Project Identity Crisis" (LOL) because...







This 100% rust-free, 1997 XJ 2-door from Texas found its way into my driveway this past weekend. It's currently 2WD, but we have all the stuff to convert it to 4WD (a 94K-mile driveline, with 53K-mile Dana 30/Dana 44 axles).



I have my daughters for the long holiday weekend this year, so we have a "hit list" of things to start working on, including:

  • Install an iPod-ready stereo
  • Install Gentex Temp/Compass rearview mirror'
  • Start installing cleaner interior bits (this one is kind of dirty, and the headliner is sagging).

Shortly (after I get a parts XJ out of the garage), we'll start thinking more seriously about installing 2" TeraFlex BB spacers in front, and H.D. Offroad Engineering shackle relocation in the rear (if time allows). We also have a set of 2011 JK Rubicon shocks all-around. The rear Dana 44 install won't be far behind.

Craig

154317_4884305075385_601005405_n.jpg
 
Jeep Hoarder! hahahahaha! Nice find.

Guilty. :rotfl:

Today's progress (Thanksgiving 2012)...


Successful 10-minute installation of a Pioneer iPod-ready stereo in Mira's XJ. It was pulled from another Cherokee ("freebie" from a parts Jeep), and already had the adapter harness wired up. Test-run with the Foo Fighters. Rock on!
575258_4892702605318_1578532018_n.jpg



Mira driving the new XJ out back. The kid's a good driver!
3744_4895966526914_451873956_n.jpg



We also removed the stock front bumper, and will finish up the grinding work on the JCR DIY front bumper shortly.

We're also parting out a 2000 XJ that had all of the OEM skid plates (front/engine/transfer case/gas tank), as well as an ARB front bumper. Mira will get the skid plates, with the exception of the t-case skid plate (she already has a JCR Offroad one), and her little sister Maeve will get the ARB front bumper for her '99 XJ 2-door.
 
Looks like JCR is running a bunch of black friday deals on XJ parts.
 
This week, I completed a budget-boost install on Mira's Jeep, along with mounting up the Ravine wheels & 31" x 10.5" KM2 tires.

148281_10200102494115027_304265083_n.jpg



Today, I got the 8.25 rear axle pulled today. Dana 44 install tomorrow, hopefully. I also got a bunch of the interior items stripped out of the 1999 "donor" Jeep.

537539_10200126777282091_1507193577_n.jpg


76753_10200126777842105_737722701_n.jpg
 
Thanks Randy.


More progress today. The Dana 44 is 90% installed. I still need to hook up the brake lines, and figure out where I'm going to route the vent line (and also trim down the u-bolts).

533496_10200130243488744_2099134568_n.jpg
 
Hiya, Mira here. I want to send out a HUGE thanks to our friend, Mitch Ware, for sponsoring my jeep project with a cash donation. We really appreciate your generosity to my jeep project. We will use the money well.

I also want to thank JCR Offroad for sponsoring me with an AWESOME discount on my Ultimate Sliders for my Jeep Cherokee. I appreciate it and I will post pictures of them once we get them installed.

58417_10200693894619670_1993836087_n.jpg
 
Thats awesome!!

I wish I received donations for my Jeep. :D
 
Keep up the good work.. Don't forget to put the mount on the front for the Sand Dunes flag. :thumbsup: :wave:

Your growing up WAY to fast.
 
Quick update...I bought a "new" house (no garage yet) in January, so progress has been slow with the move, getting settled in, etc.


Mira & I (finally) finished painting her brake calipers with Eastwood caliper paint (one of Mira's sponsorships). We obviously did it with brushes vs. spraying. Overall, it seems like good stuff, and seems to be more durable initially than some Duplicolor (aerosol) caliper paint I have used in the past.

397830_10201053997262011_487936076_n.jpg



A couple weeks ago, I got the calipers/pads installed, and the brake lines hooked up & bled. I would have liked to have done this with Mira, but am trying to balance progress with the limited time I have with my girls (I'm a divorced dad, and this was a non-kid weekend).

310081_10201139506479688_867744547_n.jpg



After the install, I got it out for a road test for the first time with the 3.73 gearing and disc brakes. I really liked the gearing with the 31" (actual 30") tires. The brakes seemed to work pretty well, but I may look into a disc/disc proportioning valve before it's all done. It feels like I could still gain some braking performance out of this set-up. Keep in mind that, while it was a different vehicle platform, the rear axle (and the front that will eventually be swapped in) came out of my former 2005 Unlimited, so I know how the brakes performed on that vehicle.

936983_10201089349665799_345789679_n.jpg



I hope to make a little more progress with my girls over Memorial weekend. More to come...
 
Back
Top