• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Scrambler on a budget

That is a really GREEN JEEP!! Holy cow!

Your fab job looks great!
 
looks great.. what are you linking to the switches?

arb air compressor

2 middle rock lights

2 rear rock lights

2 future front driving lights, no cash for them yet :popcorn:

Also hooked up my cb radio, so im ready to go mudding when i get my doors back
 
the holidays are coming and lots of people don't have food.

The Jersey Jeepers organized a much needed food drive. 30-40 jeeps showed up to deliver the goods. it was a fun caravan down the local roads of sussex county.

i wish i had some pix of that, but here's what i took.

1119111008-1.jpg


1119111013-1.jpg


1119111013a-1.jpg


1119111013b-1.jpg


1119111014-1.jpg


1119111025-1.jpg


1119111026a-1.jpg


1119111026-1.jpg
 
That Scrambler's lookin' good! I may be moving back to NJ due to my injury and inability to work. I'd love to help out on any future food drives, etc and get some info on the club. Thanks.
 
i finally scored a central vacuum job, and it was a nice day for it. so i put the hard top on.
this jeep is not just a toy i need it to work out of.

it sure beats the hell out of my toyota especially the grin factor :smokin:

jeep342-1.jpg


today i got my much needed tailgate, rocker knockers and vent cover.
now i can haul stuff, park it publicly and not worry to much about door dings

this seal is a pita it seems too thick.
IMG_2636-1.jpg


IMG_2642-1.jpg


IMG_2640-1.jpg


IMG_2638-1.jpg


IMG_2641-1.jpg


IMG_2639-1.jpg
 
the rocker knockers were next
removed the body mounts and cut 3/16 off the 2 that hold the bottom in place.
i jacked the body and then shimmed it up. put the mounts back in then test fit it.
i masked the surrounding area just in case.

IMG_2646-1.jpg


IMG_2645-1.jpg


c clamp with a few 2x4's will hold it just fine

IMG_2647-1.jpg


lower it down a little remove the tape, jack it back in position and drill the holes

IMG_2643-1.jpg


ran out of daylight again so i'll do pass side another day

IMG_2644-1.jpg


IMG_2649-1.jpg


IMG_2648-1.jpg


wow i just noticed that 2x4 i left in there LOL i better get it b4 i forget it
 
That is one sweet job in one year for sure. :thumbsup: Gonna be doing my Cj-7 in that green or something very similar. Love it !!
 
thanks guys :woot:


im hoping to get the doors back so i can haul some toys for this great cause.

its going to be huge with convoys of jeeps from many clubs.

Slide1-1.jpg


basically everything is completed. i put the pass side rocker on tonight and had to go for a cruise

phone pix

1126112019a-1.jpg


1126112019-1.jpg


1126112018b-1.jpg


1126112018-1.jpg
 
i finally got rid of my old cracked brake hoses. i was careful not to drive too fast or stop to quickly for fear of blowing one out.
these new lines are great!! big difference felt at the pedal, and there made in the USA :cheers:

IMG_2653-1.jpg


IMG_2654-1.jpg
\

now i can haul some stuff in the back.

1127111205-1.jpg
 
Dude congrats on the great progress. What kind of doors are you going to be running? I love the last picture with the bed loaded down! I still have to finished stripping my full and half doors for paint then save a small fortune for new seals and whatnot. Just have not had the motivation lately.
 
Dude congrats on the great progress. What kind of doors are you going to be running? I love the last picture with the bed loaded down! I still have to finished stripping my full and half doors for paint then save a small fortune for new seals and whatnot. Just have not had the motivation lately.

i've got full steel and 1/2 steel doors . it was a scary ride home 1500 lbs without an alignment or correct castor. those things are on the list of "to do's" untill then no more hauling heavy stuff
 
Back
Top