• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Jeep cj "ART"

jims chop shop

Scrambler Junkie
Lifetime Member
City
stafford
State
va
47b2d8a5f028a42c-1.jpg
 
nice.. I plan on mounting my CJ's original chrome grill cover on my garage wall and eventually figure out how to put some (dim) lights in lieu of the headlights.. just as an accent piece..

I've seen guys on garage journal make cool (air or water) hose reels out of sports car spare rims.. figured another CJ wagon wheel would work well for that as well
 
Made this for the wall at a local restaurant. Going on at least a year and it's still lite up with LEDs. For my own garage, I have am old CJ grill (pre 76), a late CJ grill, a YJ grill, and a TJ grill/front hood section/fender caps/and front bumper. Problem is I have Jeep parts stacked to the ceiling so no room for them yet.

mot2010058Small-1.jpg

mot2010055Small-1.jpg
 
Last edited:
unbelievable! Looks like the death star. Cool.
 
How cool would it be do have that table filled with a bunch of NOS RARE PARTS

"red mistress"". ??? """82nd"". ????
 
My one piece front end I plan on cutting up to show the grill with fenders and hooking up some lights for a nice wall piece in my garage. Dash idea is a good on for a stereo holder in the garage.
 
I have a mint CJ-10a grill (no headlight cutouts) that'll likely end up as wall art...not sure yet.

Craig
 
Hmmm...I've got a nice Jeepster grille...

That "Wagoneer Ball" makes me sad....
 
Moab Brewery has one of Dan Mick's CJ's sliced lengthwise and mounted on the wall

I have a chrome grille cover I was going to do lights as a wall hanging myself, I'd be very interested in your LED set up OnlyinaJeepCJ, what, how, etc

thanks
 
I have a few grills on my garage wall... a M38, a CJ-3b and the grill off of my old CJ-7. I also have a bunch of signs too. I'll post a pic up when i get a chance...
 
Moab Brewery has one of Dan Mick's CJ's sliced lengthwise and mounted on the wall

I have a chrome grille cover I was going to do lights as a wall hanging myself, I'd be very interested in your LED set up OnlyinaJeepCJ, what, how, etc

thanks

mot2010061Small-1.jpg

mot2010059Small-1.jpg


I used a laptop computer power source that put out 12 volts. I used 12 volt automotive type LED bulbs that are plug and plug as far as the proper resistance. I think I grounded the grill and ran the the lights in parallel. The main lights are a bad set of buckets with just the outer glass of the bulb used with a spacer and the trim ring. The Leds are mounted on a sliver painted plate under it. The turn lights are stock units with orange LEDs inside and OEM plugs not used. Also added a plug chain on/off switch, but the restaurant just turns out the power to the whole dinning area. The grill was one that had rusted out sections. Not good for me, but perfect for this project.
 
I found a few of my grilles this weekend and hung them up... doesn't get more American than that.

Craig
 
Back
Top