• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

What is with people and Line-X type Products On Nice Original Jeeps?

this might be a good poll question. would you rather buy....
a. a freshend up scrambler with a freshly painted "rough" looking bed.
b. a freshed up scrambler with a line-x'd interior over the same "rough" looking bed

i am about a week away from making this decision myself. my bed has some sagging, some pitting, and a couple rust holes about the size of pencil. new bed floor, 770.00 + 500.00 labor to install...vs. patching and repairing bed for 250.00. in my opinion the line-x would look better over a less than perfect bed floor.
 
You also need to cut the front fenders back and use the wooden boards on the back as ramps to pull it up on the trailer with. :rotfl:

i m thinking about herculining the interior of this one to include rollbar and dash as well as the entire exterior..particularly the ugly chrome grill w/ pinstrim and the shiney hood. thoughts?


IMG_2048_zpsb0d44743-1.jpg
 
i m thinking about herculining the interior of this one to include rollbar and dash as well as the entire exterior..particularly the ugly chrome grill w/ pinstrim and the shiney hood. thoughts?


IMG_2048_zpsb0d44743-1.jpg


I'm pretty sure the value on that Scrambler will go up IMMENSELY when you take that heinous volunteer plate off of it. It will get better gas mileage and ride smoother as well.
 
this might be a good poll question. would you rather buy....
a. a freshend up scrambler with a freshly painted "rough" looking bed.
b. a freshed up scrambler with a line-x'd interior over the same "rough" looking bed

i am about a week away from making this decision myself. my bed has some sagging, some pitting, and a couple rust holes about the size of pencil. new bed floor, 770.00 + 500.00 labor to install...vs. patching and repairing bed for 250.00. in my opinion the line-x would look better over a less than perfect bed floor.

Do what you feel is in your best interest. IMHO, at the point the rust/damage is bad enough to need floor patches/replacement then the value to a collector looking for that "all original" example, and willing to pay a premium for it, is gone. I don't think anyone is saying "do not EVER use bedliner on your Jeep or you'll ruin the value", there are plenty of good reasons to use the stuff and it comes down to personal preference. There are collectors for Jeeps just like anything else such as Ferraris, Corvettes, Hot Wheels, Barbie dolls, bottle caps, and toilet lid covers. The point is, that the pinnacle for most collectors is the most rare, highest quality item of whatever it is that they collect. In this case, Scramblers. Therefore, great condition, all original, highly optioned Scramblers are the most desired. To see one in that kind of condition irreversibly modified to some, may be no big deal but to others who aspire to someday own one in that condition is horrific. Imagine a Hot Wheels collector seeing a 7 year old boy open a perfect, original pink Beach Bomb VW Bus in the package and play with it in the dirt, chip the paint, spray paint it, and break a wheel off (which is minor compared to some of the tings I did with my Hot Wheels!). Maybe no big deal to someone who isn't a collector but to someone who is, it is like Old Yeller x10! http://blogs.laweekly.com/arts/2011/10/hot_wheels_volkswagon_beach_bo.php
 
Last edited:
it was the 1st mod i did.... it does have a orange tiger paw on it as a replacement....




I'm pretty sure the value on that Scrambler will go up IMMENSELY when you take that heinous volunteer plate off of it. It will get better gas mileage and ride smoother as well.
 
I have first hand experience with comparing a classic Corvette to a Scrambler. :thumbsup: See sig.

When done, my Scrambler will have a different engine, new paint, lift, interior. Will I Line-X the interior? Yes. Why? I love the look and have done it on past vehicles. The guy who bought my fully restored / modded CJ7 absolutely loved the look. Also, my Scrambler will no where near be original so why not build it like "I" want it and if the time comes to sell it, I am sure someone will come along who loves the Line-X look.

Will I Line-X my Vette? no :rotfl:
 
Both the OP and I are referring to an all original jeep with original untouched paint, not a restoration.
 
Speaking of restorations this is what I mean once again. Beautiful looking Golden and then you get to the interior....... why? Especially the ugly color? He did everything right until he did this...... emphasis was on originality UNTIL he slapped the liner on and the non original paint color inside. If I dropped $15K on this Jeep it would never be sitting outside and hence no need for liner.....ahhhh welllll, I give up.... I thought I was done with beer for the evening but.....

http://cgi.ebay.com/ebaymotors/Jeep...3869798?pt=US_Cars_Trucks&hash=item41728010e6
 
Sorry, but I kind of like it. It almost looks like it should have been built that way from the factory. I was never a brown/tan guy, but the more Jeeps I see in that range (original or not), the more I like them.

Hmm... It kind of makes me think about a silver/gray colored liner to go with the black body we're going to paint :-I Have to did around and look..
 
Speaking of restorations this is what I mean once again. Beautiful looking Golden and then you get to the interior....... why? Especially the ugly color? He did everything right until he did this...... emphasis was on originality UNTIL he slapped the liner on and the non original paint color inside. If I dropped $15K on this Jeep it would never be sitting outside and hence no need for liner.....ahhhh welllll, I give up.... I thought I was done with beer for the evening but.....

http://cgi.ebay.com/ebaymotors/Jeep...3869798?pt=US_Cars_Trucks&hash=item41728010e6


Pretty sure they didn't come OEM with strokers either?

That Durabak wouldn't concern me in the least.

Oh, and I'm bidding on the original object of this thread :evil:
 
hmmgif-1.jpg
The one above is showing rust underneath so maybe the line-x doesn't work under tubs......
 
In the end, it's whatever the person wants to do to their Jeep. Simple as that.
 
Good luck in the bidding on the 5. If you can clean up that roll bar or perhaps cover it with an original padding kit it would help a lot. Great color btw.
 
I agree with MN-Paul's observations above. To me, diamond plate anywhere on a Jeep has that "this is all that's holding the body together" look. I suppose on some it's justifiable if it's in really bad shape, but generally it just looks bogus to me. My 2 cents worth.
 
Think this a thread i will leave to the stocker guys :cheers:
 
Back
Top