- City
- Suwanee
- State
- GA
Ok folks, for the last couple of months I have been installing a rear seat and belts in the back of my Scrambler in hopes of being able to install a car seat with a five point harness for my 5 year old daughter. I am happy with the security of the Bestop fold and tumble seat and with where I have mounted the lap belts. The problem first came up when I tried to cinch down the simple lap belt to secure the 3 in 1 booster seat we have. I pulled and pulled on the seat belt and was able to tighten it down pretty good, but the base of the car seat had about 6 inches of movement front to back...not good.
I then went to the internet and found a universal "LATCH" system mount that slips through the seat to give you three points of attachment for the seat. I was able to use this system to install the seat much tighter and much more securely, but alas, I still have about 2 to 3 inches of movement with the base of the seat. The back of the seat is pretty tight to the back of the fold and tumble seat, but I can't for the life of me, get the bottom to not move like in a traditional vehicle.
I have searched around to try to find some pictures of other folks using only a lap belt or this LATCH system, but I have not seen any clear photos of how people are securing child car seats in their jeeps.
I am looking for other car seats to see if they may work better than what I have but it will be less than a year where I will need to transition my daughter from the integrated 5 point harness to using the seat belt and the booster.
Does anyone have any suggestions for the present? Should I try to figure out a mount for a shoulder belt in the rear? I don't necessarily want to go to a custom built cage, but that may be the only true method to make sure my daughter is safe. For the record, I am only talking about being able to take the whole family on a drive, not any kind of hard core off-roading.
I then went to the internet and found a universal "LATCH" system mount that slips through the seat to give you three points of attachment for the seat. I was able to use this system to install the seat much tighter and much more securely, but alas, I still have about 2 to 3 inches of movement with the base of the seat. The back of the seat is pretty tight to the back of the fold and tumble seat, but I can't for the life of me, get the bottom to not move like in a traditional vehicle.
I have searched around to try to find some pictures of other folks using only a lap belt or this LATCH system, but I have not seen any clear photos of how people are securing child car seats in their jeeps.
I am looking for other car seats to see if they may work better than what I have but it will be less than a year where I will need to transition my daughter from the integrated 5 point harness to using the seat belt and the booster.
Does anyone have any suggestions for the present? Should I try to figure out a mount for a shoulder belt in the rear? I don't necessarily want to go to a custom built cage, but that may be the only true method to make sure my daughter is safe. For the record, I am only talking about being able to take the whole family on a drive, not any kind of hard core off-roading.


