Search results

Ken. If you're still on the board please contact me directly Thanks Terry Cjatheart@yahoo.com

I have a set of two Blue Kayline soft doors in very good condition and wonder if they have any value to anyone. I have the blue top as well and the seams are all solid but the fabric is not very good, sun cracked and what not, but the window is good IIRC No bows Any thoughts?

has anyone here found a porkchop style wheel well tool box that would fit behind the wheel wells in a Scrambler without the roll bar in it? All Ive found appear to be to long in the base but I havent found dimensions on all of them thanks

WEll i took everything out of the bed and discovered some significant rust in the corners, not through, not close to through but lifting the paint off and on its way to being a problem. Id like to nip this in the bud now and initially thought Id get some POR 15 ordered and seal it with that but...

Does anyone have the gas strut hood lifting/holding set up? Id like to make my own but need to figure out the necessary gas struts. If yall have this set up can you shoot me an email or Pm me the strut number or dimensions? Thanks

So my speedo quit, I went to replace the cable assuming it had broken, wrong it was fine.... I got a new inner cable and cut it slightly longer, installed it and even though I can turn it by hand and get movement freely to the dash the speedo still doesnt work, so I put in another slghtly longer...

I thought maybe we have all found some interesting relics abandoned in the deserts or wherever we explore that might be cool to see Here are a couple from a Mojave trip I was fortunate to share with some friends in 2015

small towns are the best!! Id love to have this guys collection to treasures

Not sure this is the right forum but here goes anyway. My speedo quit working, I assumed it the cable and dig out my replacement cable and start to fix it. the old cabe is fine, I tak eboth ends loose and if I spin one end the other follows suit so I think bingo, except for the blood Im golden...

I think I might want to upgrade the front axle so I can change to a lower gear ratio and still have adequate tooth engagement. I currently have a Scout II rear D44 and intuitively it seems the mate to that would be my best choice but I understand Scouts have some funky alignment specs up front...

OK all, My 82 258 with a 4.0 head and MOPAR EFI conversion is knocking, the local shop thinks its a wrist pin but regaardless I need to address the 258 portion of the engine. Seems my options are to simply buy a rebuilt 258 and swap the head and EFI and put it in. Probably easiest but not...

Does anyone know of a robust motor mount like the MORE 'bomb proof' mounts that also lowers the engine a skosh? I thought someone did but i couldnt find them searching today thanks

Some time ago I swapped in some headlights that use a replacable halogen bulb, they helped but are still suboptimal at times. I saw a YJ with a similar set up but the halogen bulbs were swapped for LEDs. The owner raved about them but then dont we all rave about our upgrades? My question is do...

I was watching the show Motorz the the other day and one of the viewers questions that was answered was the biggest seat of thepants power increase bang for the buck, exhaust, cold air intake, etc. The host surprised me by saying that in his experience the most noticable powerincrease came from...

I need a new front fender, seems Omix is about 20% more expensive than Crown, are they really any better? 4+x what I paid for the last ones I bought, sheesh!only 30 years ago too....

this is totally irrelevant and is just something that Ive been trying to understand. How do we value Jeeps? When is a given price ridiculous for one jeep when another that SEEMS comparable or even to be less, is a steal? Ive beeen spending alot of time at my mom's about 300 miles away due to...

I replaced the speed o cable last week and it lasted 10 12 miles before it failed (mostly cause im a *******), I was going about 35 or 40 MPH when it failed and now the speedo is registering 35 all the time, parked, running, not running, all the time.... So, did I ruin my speedo head and I need...

my Speedo cable broke this past spring, Ive been using the GPS for speed but would like to fix it now for some reason. I have AC, I assume it has to go to get to the speedo cable at the back of the gauge? I can get my hand on the cable but not th enut. any tricks Ive not thought of? Through the...

Do I really need to pull the radiator and grill just to change the #($*&^ PS hoses? Any tricks Im not seeing? thanks

The pice that ties the column lock to the rod to the actual switch has broken in my column, other than that its still nice and tight, its a tilt and is solid. I know I could tear it all down and rebuild it myself probably, its been this way better than a year though so Im not seeing it happening...