• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. C

    electric fans

    If all you want is on/off, you can use a temp switch as a "sender" (can buy type to screw in where sender goes) and it will close relay for you. Then you have auto off/on based on temp. You could keep your toggle switch inline to have a master off for system too. I used the Dakota digital unit...
  2. C

    electric fans

    If you pull the contour fan from the yard, grab the harness up to where it goes into power distribution box. The shroud doesn't have any relays in it, but it does have a big 'ol resistor in it that you will want, along with the weathertite connectors for the resistor and the motors. How you...
  3. C

    1983 Scrambler "STUMP JUMPER". Frame off, 5.3 Conversion.

    The picture I showed happened behind a supercharged Ford 5.0 with a power-shift from 1st to 2nd at 6k. I'll see if I can find pictures of the rest; swipe-shaped dent in bed floor support, smashed e-brake cable center bracket flat (not sure how it didn't break the cable), dent in one muffler...
  4. C

    Factory fogs - need wiring help please

    1st is white = need to know where to splice - This is the power feed that goes into the relay to power the lights when relay is triggered. In stock form, it was spliced into the parking/tail light circuit (after the fuse so it is protected along with parking/tail harness) 2nd is black = ground...
  5. C

    1983 Scrambler "STUMP JUMPER". Frame off, 5.3 Conversion.

    Good choice. Here is what you are avoiding..... I did not get pictures of laying on the ground to remove it or the drive home with front wheel drive.
  6. C

    Holley carb to stock CJ charcoal canister question

    Capping them may help the smell for a while, but the can will eventually get saturated and likely leak. The fuel tank has to vent somewhere as the outside temp changes and fuel is used while driving. You can:' - Seal up canister and use a vented gas cap. This will make the rig smell like a...
  7. C

    Holley carb to stock CJ charcoal canister question

    The Truck avenger is a little different, but same ideas. Rear port is for power brakes. It is full manifold vacuum, so it will not hook to your canister in any way. The large front-left side port near base of carb is for PCV. You will T in hose "E" from your canister (shown in your picture)...
  8. C

    Heater core replacement/heater box rebuild

    You can use MT0972 (Autozone #) for a resistor and it will work like stock. You can use BR430 (Napa #) which is for a YJ, and it will work as well. Each of these will take a tweak to the hole in the duct, but they work and are easy to get. As for heater core, I could not find a copper and...
  9. C

    Sr4 question

    Weak spots on SR4: One is offset shift set up. Bushings wear and the shifter gets sloppy. Another, and the biggest, is the ball bearings used on input/output shafts and the case bosses they live in. The ball bearings are weaker than roller bearings and the bosses are thinner walled with less...
  10. C

    Manifold breather question

    What motor and how many miles/how old is it? If the filter is saturating with oil and dripping on the valve cover, it means your engine is not venting properly or is pressurized beyond venting capacity which is a bigger problem. Make sure your PCV system is working properly. That system should...
  11. C

    NEED Heavy Duty "new" (not rebuilt) power steering pump with Serpentine pulley?

    I don't think the pump or pulley is particularly special. For new, Speedway Motors has a fair selection of pumps and pulleys. Or try Tuff Stuff directly....
  12. C

    Spankrjs' 1984 Long Term Project

    I wrestled with this on a couple different rigs. I am not sure there is a ironclad answer, just variations and its up to you what you can live with. I certainly don't have a good answer but will offer some stuff I found and proved out. If I understand what you are saying correctly: -overall...
  13. C

    anyone running a Jeepair A/C? A few questions.

    Craveman - what do they not have? I called them about putting a system in behind a Ford 5.0. They told me they didn't have a kit for that, but if I could get hoses made the rest of the kit was universal. Meaning the condenser, evaporator and drier were all matched and I could use the Ford...
  14. C

    1984 Alaska Postal

    Yea. What craveman said... You should be able to use the bellhousing off any ford up to the mid 90s, they just have an internal slave rather than external.
  15. C

    Need some wiring help with wiper switch

    I missed other question; grounds. On the cj motor the motor grounds to the windshield frame. Which means through the hinge to the cowl. You can supplement that with a ground wire from a mounting screw to a known good ground. The motors starting getting a dedicated ground wire in the yj years.
  16. C

    Need some wiring help with wiper switch

    Go to this thread: https://www.cj-8.com/forum/showthread.php?41047-Need-help-with-4-wire-wiper-motor-to-relay-connection Look at color arrangement of wires in flat plug in post 1 Look at color arrangement of wires in flat plug in post 5 Match them up as if you had plugs on each end of your...
  17. C

    AX15 or NV3550 behind AMC V8 looking for real world success vs. failure experience

    Scott-p; The Bellhousing is a Lakewood for small block ford that holds the Ford truck 164 tooth flywheel and uses an 11 inch clutch. To make the NV3550 work with Ford engine; I used the 11inch Ford Centerforce pressure plate which holds an 11 inch - 10 spline dual friction disc for chevy...
  18. C

    AX15 or NV3550 behind AMC V8 looking for real world success vs. failure experience

    I have run an NV3550 behind several v8s in states from stock to slightly massaged. I am running one now behind a ford 5.0 that makes right at 300hp at the wheels. You are right on with the torque specs. The AX-15 and 3550 are similar rated. The NV is rated just over 300 ft/lbs input at 7300...
  19. C

    Factory fogs - need wiring help please

    Oh.. and all these plugs/connectors should exist in all 82 and up harnesses if they weren't hacked out at some point. Not sure about 81 and earlier...
Back
Top