• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. JeepScrambler

    AMC Jeep V8 engine build; which sealants, RTV, etc to use and where?

    Got it, thanks! I'm actually already signed up on that forum. Just never really post there. Will post my question over there and let everyone know what I find out. Thanks! Sent via smoke signal
  2. JeepScrambler

    AMC Jeep V8 engine build; which sealants, RTV, etc to use and where?

    Didn't get the link in your post!
  3. JeepScrambler

    Power Steering fluid Leak

    I always pull the steering box and the steering box mounting brackets as one unit; only 5 bolts total to do this. Two bolts through the top of the front crossmember. Then there are three bolts on the bottom of the left hand side frame rail. Two of these bolts also attach the shackle hanger to...
  4. JeepScrambler

    Been a while since we had a Beer thread...

    My favorites are IPAs, specifically double and triple IPAs. This one definitely didn't disappoint! It's amazing. Made by Brewery Rickoli. 13% alcohol [emoji16] Sent via smoke signal
  5. JeepScrambler

    AMC Jeep V8 engine build; which sealants, RTV, etc to use and where?

    I'm finally getting around to assembling my AMC 401 to swap into my 360 equipped '85 CJ8. Been a while since I've built a complete engine so I want to double check on a few things. The '76 FSM for the 401 calls for Permatex no. 2 on the chamfered edge of the rear main bearing cap and along the...
  6. JeepScrambler

    Elec. Fuel Pump

    I run the Airtex E2000 fuel pumps on my fuel injected CJs. I have never had or noticed any excessive noise with any of my external E2000 pumps that several others have experienced. I debated between an internal and external pump but the simplicity and ability to do a road side repair with the...
  7. JeepScrambler

    Anyone keep their jeep stock?

    I believe the iron duke should be the GM engine blue from that era. When I resealed the iron duke in my '82 CJ8, I repainted the engine with the GM blue and it was spot on to the old color. I've still got a little of the paint let in my shop, will get the exact color for you. Sent via smoke signal
  8. JeepScrambler

    Frame paint

    I've used Por15 in the past but now prefer to use some of the Eastwood paint/rust prevention products on all my latest builds. Eastwood's internal frame coating is awesome stuff; I use it generously inside the frame rails and the body support channels. I use the internal frame coating nozzle to...
  9. JeepScrambler

    Nos vs aftermarket windsheild seal

    Anyone try the replacement windshield cowl seal from Steele Rubber products? I believe all of their products are made in the US. The cowl windshield seal lists for about $46 on their website. Curious how their quality and fitment is compared to the other aftermarket companies. They also offer...
  10. JeepScrambler

    TF999 hard tp shift out of park position? What could cause this?

    Updating this thread as I finally figured out and fixed what was causing my transmission to be hard to shift out of the park position. After some extensive searching, I found this site that described my problem I was having...
  11. JeepScrambler

    Power Steering fluid Leak

    I believe the o-ring metric lines are found in the 1980+ CJs. 1979 and prior would be the flared fittings. The two nuts that thread into the steering gear box are 16mm and 18mm. The 27-7595 is a cardone part number. Hope that helps! Sent via smoke signal
  12. JeepScrambler

    Is it necessary

    I am running one of the MTS fuel tank vent/rollover check valves on my '84 CJ7. Not correct if you are looking for OEM or a 100% accurate restoration, but it works well and is a much simpler design than the original system found on the 15 gallon fuel tank equipped CJs. Found mine on eBay for...
  13. JeepScrambler

    Power Steering fluid Leak

    Part number you can use to search or have a place like Napa cross reference it is: 27-7595 The H1 Box is a direct bolt in, requiring no modifications, as long as your Jeep has the metric power steering lines and o-ring seals. Many of the other off the shelf steering box upgrades require minor...
  14. JeepScrambler

    My De-Rustification Project

    As I upgrade/replace worn out steering components on my Jeeps, the Borgeson steering shaft is always on the parts list. I am running three of them right now and have another on the shelf ready to go for the next Jeep. I also do the H1 Hummer steering box upgrade, MORE steering box mount, and...
  15. JeepScrambler

    TF999 hard tp shift out of park position? What could cause this?

    I've never really tore into a TF999 before. Is the park detent/lock spring something I need to drop the valve body out of the transmission to gain access to?
  16. JeepScrambler

    TF999 hard tp shift out of park position? What could cause this?

    I'm in the process of installing an AMC 360 V8 in place of the 258 in my '84 CJ7. The Jeep currently has TF999 automatic transmission that was rebuilt about 15k miles ago. Ever since the rebuild of the transmission, it has been hard to shift out of park. It goes through all of the other gears...
  17. JeepScrambler

    Impact wrench

    This x3! I have the same one. Have only used my air impact 2-3 times over the past year since I got my cordless Milwaukee impact. I've even found myself using it to remove bolts where before I would have used a ratchet. I'm amazed at how long the batteries last and how much work you can do with...
  18. JeepScrambler

    Happy Birthday JerseyJeeps (Eric)!!!

    Happy birthday buddy! Drinking a couple of triple IPA's for ya. Don't worry, will have the bar restocked with more IPA goodness before your next trip out! Sent via signal flare
Back
Top