• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. joshvt

    Windshield washer bottle, and separate bracket ?

    They don’t make replacement canisters any more. I replaced mine recently. Here is the thread https://www.cj-8.com/threads/charcoal-canister.48604/
  2. joshvt

    Recommendation for brake line kit

    I had inline tube lines installed. https://www.inlinetube.com/1976-2000-jeep-cj5-cj8-cj10-cj7
  3. joshvt

    Front Brake Line Routing

    I had my brake lines replaced last year. A kit from inline tube was used. Earlier today, I removed the plastic frame cover and noticed that the front brake line comes out between the bottom of the grill and cross member. It looks odd and from pics I have seen online this does not look like...
  4. joshvt

    Steering Box Bracket Bolts

    Funny- I was just at Lowe’s and saw the one size fits all wrenches. Didn’t look like they would have much contact other than at the points. Instead, i ordered a set of torx head box wrenches from amazon. I don’t think there is clearance for a socket on the innermost bolt
  5. joshvt

    Steering Box Bracket Bolts

    I need to replace my power steering lines. Decided to put in a M.O.R.E steering box bracket while i am at it. I am having trouble getting the original bracket off. Two of the bolts that connect the original bracket to the box are tucked up inside the bracket and have a head that looks similar...
  6. joshvt

    '83 4.2 258 vapor locking

    Valve cover is an Omix-ADA. I think I got mine from Summit. A bit of a pain to install, but stopped the leak and looks good.
  7. joshvt

    '83 4.2 258 vapor locking

    Here is an overview of mine- what I believe to be pretty close to stock routing. My hood gets hot enough to fry an egg (working on figuring that out), but no vapor lock.
  8. joshvt

    Power steering box for 35s

    I am going to ask a dumb question- what makes it time to replace it? Leaking? Excessive play? Reason I ask is my high pressure ps hose developed a pin hole leak this week (what a mess). It sounds like pulling the radiator and/ or dropping the steering box is what most people recommend...
  9. joshvt

    Engine Compartment Temp- Hot to the Touch

    I have a gasket that is about 1/4” thick between my carb and adapted plate (came with the carb kit from Gronk). not sure if there is something more effective. After some reading decided to check the timing. It was set at 12 degrees so I adjusted it back to 8. Things seem to be a bit cooler...
  10. joshvt

    Engine Compartment Temp- Hot to the Touch

    More specifically, does your carburetor and air cleaner get really hot? My carb (MC2100) gets so hot you wouldn't want to touch it more than a second. Seems odd and maybe unsafe... ?
  11. joshvt

    Engine Compartment Temp- Hot to the Touch

    I have recently noticed that after a 20 minute or longer drive that my engine compartment seems hotter than normal. The hood gets very hot. the aluminum valve cover, hard fuel line that goes over the valve cover, carb body, air cleaner- they all get almost too hot to touch. 258 is original/...
  12. joshvt

    What are you guys cooking!?

    We don’t flip. Turned out great.
  13. joshvt

    What are you guys cooking!?

    Farm > Scrambler > Table (later today)
  14. joshvt

    Bike rack Plan A

    Finally got my rack figured out. KC light mounts for a 3” roll bar clamped just above the tub>A length of perforated angle> Rocky Mounts bolt on track> Rocky Mounts Lo rider fork mounts. My bike fits Inside the tailgate and isn’t too high above the roll bar. 1/2 cab top is off for the summer...
  15. joshvt

    New Site Issue Thread

    Great. That will be a good improvement. Thanks for implementing all this.
  16. joshvt

    New Site Issue Thread

    Not sure. When I zoom in without tapping to get the separate window on a pic that is not a thumbnail (such as in #32 of this thread) I can zoom and pan smoothly. However if I tap on that pic or a thumbnail to get a window things get all jumpy. I’d be happy to get rid of the thumbnails. I am...
  17. joshvt

    New Site Issue Thread

    iPhone X
  18. joshvt

    New Site Issue Thread

    When I tap a picture, then zoom in and then pan to look at something up close i get a very jumpy movement that makes it hard to pan precisely. Anyone else having this issue? Maybe I am doing something wrong? Also, is there an optimal file size for uploads?
  19. joshvt

    Headlight Upgrade - Speedway Motors Relay Kit AND New Doorman Aiming Mounts

    This old thread helped me out. My headlights were so dim it didn’t even feel safe to drive at night. This weekend I installed the speedway relay kit- made a huge difference with my sealed beams. then I installed Hella vision plus lights. All I can say is WOW! What a difference! I highly...
Back
Top