Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
I used Parts Mike double arms (tie rod behind the axle) on my CJ-7 with Scout 44s. I tore them in half twice at the middle hole and a friend of mine with the same arms tore his once. Normally PM is quality stuff - so, I was surprised. We both replaced the PM arms with another brand (I can't...
Randy,
Thanks - anything helps!
BTW, I just found Dayco's site.. They have a "Dimensional Lookup" feature that is offering me some hope. Finger's crossed!
https://www.daycoproducts.com/online-catalog
Has anybody on here done a 350 TPI swap in their CJ? I'm having a heck of a time finding an upper radiator hose that will fit.
I'm trying to get from the OEM TPI thermostat housing (1-5/16 Hose I.D.) to an aftermarket (built for CJ to 350 conversion) radiator (1-1/2 Hose I.D.).
Does anybody...
I took mine to a local radiator shop - for $20 it came back looking like new.
If you want to replace the seals on the small vapor valves, Crown PN 52018823 worked for me.
Conversely, the big plastic sending unit nut from Crown was worthless - it would skip a thread before it got tight.
Look at the clutch set up for 80-83 CJs with the 4cyl engine. Although it would typically bolt to the same holes, you may be able to grind the gusset off of the slave cylinder, bolt it to the back side of the bell housing, and shorten the push rod.
I've been looking at the 1995-00 Ford Contour V6 fans... 2 speed dual fan with a shroud that fits the CJ radiator.
I'm hoping the offset placement of the fans gives me more clearance at the water pump with my V8.
Well, I didn't see any notch "cut" in my column. I did see a notch that looked like it was hammered in with a chisel (not very factory-looking)... perhaps this is it. I also noticed that this mark aligned with the large spline that only allows the lock plate to be installed one way. It's...
I'm installing a rebuilt steering column and Flaming River DD shaft in my Scrambler project and was wondering if there was a "center position" for the steering column itself. I have the PS gear box centered and the DD shaft cut to fit - but, it seems like I could install the steering wheel in...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.