• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. ineedajeep

    Spray Liners? The good, the bad, and the ugly?

    My whole Scrambler is done in Line-X. I bought it that way. It's tough stuff. I wouldn't do the whole vehicle if I were to get another Scrambler. I think the most important thing would be the quality of the shop doing the job. I would also have everything removed and do the inside and the...
  2. ineedajeep

    Cj 7 1/2 ?

    I have seen several CJ-7's on the internet with a half-hardtop and bulkhead. So, yes it can be done, but how much trouble I don't know.
  3. ineedajeep

    I need Spring Over real life opinions.

    I do appreciate everyone's responses. I will be talking to "Alcan" to see if they can build springs to my needs. Otherwise I will be purchasing the "RE" SOA springs. Going back to SUA isn't an option. I would probably go to a coil sprung suspension first. Thanks everyone for your help and I will...
  4. ineedajeep

    I need Spring Over real life opinions.

    I am looking for a more controlled ride, not necessarily stiffer. To be honest I rarely use my Scrambler for anything other than daily driving, so you see it's ride is important. Can I get a more controlled ride? Or does this suspension limit the results? Before I went SOA it didn't porpoise...
  5. ineedajeep

    I need Spring Over real life opinions.

    Let me start by saying this is my daily driver. I have converted my Scrambler to spring over axle. I am running 35"x12"x15" MT tires and used "Rocky road outfitters" for the "SOA" kit. I am also running aftermarket Wrangler springs (Crown) and "MORE" shackle reversal. My Scrambler feels...
  6. ineedajeep

    whats the best way for the softest ride

    I used the "Rocky Road" YJ conversion and the length of their shackles causes a loss of caster in the front and the steering will be more skiddish. I don't like their service and their attitude and wouldn't purchase anything from them again, but that's for another time. I did replace replace...
  7. ineedajeep

    Proud CJ8 owner thanks to this place!

    I got it for $6,500 and feel like I got a great deal for me. Everthing works and it's LineX'd inside and out. As soon as I can get off of work long enough I plan on taking it trail riding. Peter
  8. ineedajeep

    Aftermarket hard brake lines, any good?

    Thanks, Inlinetube it is, ordered this morning.
  9. ineedajeep

    Aftermarket hard brake lines, any good?

    I recently snapped the hard line for my left front brakes. It is presently connected with a compression that I look at constantly. I have noticed that Qudadratec and 4WD Hardware, etc. sell complete hard line kits. As brakes are one of those critical things that has to be right, can anyone...
  10. ineedajeep

    Need seat advise for a DD.

    Thanks guys, I was looking for real "seat of the pants" info. At least you've given me a good place to start. Peter
  11. ineedajeep

    Proud CJ8 owner thanks to this place!

    It came from Wilson. The PO used it for hunting and such. I wasn't lifted and had buckshot mudders on it when I got it.
  12. ineedajeep

    Proud CJ8 owner thanks to this place!

    Thanks, I tried for it seems like hours to do that last night with no success. Peter
  13. ineedajeep

    Proud CJ8 owner thanks to this place!

    I just wanted to say thanks for making me NEED a Scrambler. I bought this one from the classified section from a forum member in North Carolina. Have been spending money ever since thanks to you guys. I am enjoying every minute of it. I hope to be able to make the "Nationals" next year and meet...
  14. ineedajeep

    Getting a Half-Hard Top, couple ?s

    I would check the mounting hardware built into the back of the top. The mounting hardware that attaches the top to the bulkhead tends to break. I don't think a proper repair would be cheap or easy.
  15. ineedajeep

    Door options with 1/2 hard top?

    Bestop says that none of their uppers will work.
  16. ineedajeep

    Door options with 1/2 hard top?

    I don't know for sure if this will work, but Bestop's supertop for the CJ8 accepts full hard doors. They also make YJ upper doors to fit the supertop which also accept full hard doors. Maybe those uppers will also fit a halftop as it also accepts full hard doors. I will call Bestop tommorrow...
  17. ineedajeep

    Need seat advise for a DD.

    I have installed a tilt column. I have also made brackets to set the seats at approximately 4 1/2" from the floor and almost flat as per Mastercraft's suggestion, so they are about 1 1/2" lower. I wish I new someone with those type of Bestop seats so I could ride in them and try them out.
  18. ineedajeep

    Need seat advise for a DD.

    OK, I read all about the Mastercraft seats on the various Jeep forums. After purchasing a set of "Mastercraft Rubicon" and using them for several months, I have come to the conclusion that they aren't seats made for a DD. They are comfortable, but just way to much trouble to get in and out of on...
  19. ineedajeep

    rocky road offroad cj too YJ spring conversion peice

    I have them on my Scrambler and they are made well. Even saying that I wouldn't buy them again from RRO. I am removing the ones on my Scrambler to go back to a shackle reversal.
  20. ineedajeep

    install air conditioner

    I bought the same A/C for a 6 and was quoted $500.00 from and A/C shop that had experience installing them in the 70's and 80's. So they new what they were getting into.
Back
Top