• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Spray Liners? The good, the bad, and the ugly?

mewass

Basic User
City
na
State
ky
Does anyone know which is the best way to go with a spray on bed liner? Do not know which ones are good and which to avoid. I have heard there aren't any you can do yourself that are worth anything. Used Rhino Liner in the past, but now hearing rave reviews about Line-X. Anyone had experience with which to use, and which to definately keep away from? This scrambler is going to spend alot of time in the mud!
 
You get what you pay for. I have the DIY Duroback in my Scrambler and it has been there since 98. No problems but it does not haul anything that isn’t strapped or bolted down. My tow truck has Line-x, Duraback would never last in it.

Mud will not hurt the DIY material if the surface is properly prepared.

Later, Ken
 
Personally I like Rhino. Here's why -- I typically don't run a carpet in my Scramblers and Rhino's rubbery feel is easy on the feet -- or anything else that happens to rub against it. It's more expensive than Linex though.

That said, if you don't care about the rubbery-feel benefit, go Linex. Cheeper, more durable (I'm guessing) and I'm sure you'll get a bunch more benefits from other folks.

PS. I spent a day power washing a roll-in liner out of my Jeep. It had an irregular texture, thin spots, flaked and actually made the bed look worse than without -- even with a bed full of scratches. I say save up, do it right, and do it once.
 
ScramFam said:
PS. I spent a day power washing a roll-in liner out of my Jeep. It had an irregular texture, thin spots, flaked and actually made the bed look worse than without -- even with a bed full of scratches. I say save up, do it right, and do it once.

(Hi, Jack) Scramfam - I have some junk liner in mine, it's faded (s. Fl sun) and worn out/cracked in many areas. It also is apparently covering a bit of surface rust in two spots. Can you give a little more detail about what you did to remove the old stuff? Anyone else do this a different way? (Sorry, there are no tub-off media blasts in my budget)
 
sanderson9 said:
Can you give a little more detail about what you did to remove the old stuff?

No problem. First, you should know that I tried to manually peal out the bedliner for about a month here and there -- put the kiddos to work on it, etc... Took a LOOONNNNGGGG time to accomplish minimal results.

Someone on the site recommended renting the most powerful power washer I could find and blasting it out. Worked Perfectly -- and it was kind of fun. I rented mine from Home Depot. Cost probably less than $30. As for techniques -- you'll figure it out.

Here's the deal though. It works on roll-in liners only. You'll NEVER get Linex or Rhino that way.
 
My father had Rhino in his last truck, we both went with Line-X in our current trucks. Both are about as good as the other, though as ScramFam says, the Rhino has a bit more of a rubbery feel to it. Recommend you go both of the shops and look at their demonstration trucks. Make sure you ask them how long it's been since it was last sprayed (not in the truck as they may have resprayed the truck).

We have a couple of folks who have done the inside with the DIY lines. One did it when it was too cold so the texture is so rough you would probably tear your hand on it if you caught yourself from fauling. Another did it when the weather was warmer and it looks real good and has stood up for about two years without a problem.

I took the cheap way out and only painted mine. Not so much being cheap as being able to easily repair if something does happen. I just have a rubber mat I put in the bed. After a year, only a few minor scrapes, but most of those come from hauling "souvenoir" rocks off the trail. If it does ever get messed up, just rough up the surface with some sand paper and repaint.
 
I'm thinking about having mine painted this time. Like you, I don't really haul anything with it -- at least not that often.

Then again, another cool benefit of Rhino is NVH -- sure cuts down on the road noise.
 
I really like line-x. I have had it in the bed of my truck for one year and it still looks just like the day I got it. I paid extra for line-x ultra which is a kevlar overlay, with a life time guarantee. I couldn't be happier. I also use the truck as a truck so it has carried it share. It might be a little slick when wet, but to never have to redo is worth alot.
 
I agree with the original comment- you get what you pay for. I prefer Linex as I like the consistent texture much more so then Rhino. It is harder than rhino- so if you are riding around barefoot- you may tear up your feet. Always pay for the UV additive.
Best of luck.
Kyle
 
I get to see trucks everyday with both linex and rhino and others at the dealership. Both hold up the same to abuse, both fade at about the same pace. The kevlar linex doesn't fade that I noticed yet. The linex seems to have a smoother more professional finish without being as thick. But it comes down to the guys spraying it and doing the prepwork I'm sure.
 
I have LineX in my truck bed. I'll buy it again for my next one.
 
For a DIY roll-in liner, Herculiner looks good and is fairly durable, if prepped right. But- the texture is really rough- I've skinned knees on it:(
 
for what it is worth..i used the duplicolor spray bomb bedliner...it is more like tough textured paint...i used it on bumpers rockers guards etc too...it is not that tough...but u can do a truck bed for 30 bucks..and spot repair...it is great stuff as long as u knw it is not really bedliner..just tough paint
 
I paid $550 to LINEX for my Scrambler floor from firewall to tailgate. I removed the entire interior including the rollbar- they just scuffed and shot. I would have scuffed it myself had they offered to take another $50 off- they wouldn't.
Thanks
Kyle
 
My whole Scrambler is done in Line-X. I bought it that way. It's tough stuff. I wouldn't do the whole vehicle if I were to get another Scrambler. I think the most important thing would be the quality of the shop doing the job. I would also have everything removed and do the inside and the bulkhead seperately. I would use Line-X again though.
 
Herculiner to Line-x

I herculined my jeep in 2002. I spent a lot of time prepping it and making sure it was perfect before I did the application. Now, almost 6 years later there are plenty of thin spots and it has faded a lot. Still, pretty tough after all the abuse I put in there, but definitely needs another application.

However, the application I will be putting in is not going to be herculiner again. I will take the home depot spray washer and peel off the herculiner and go with Line-x. I've seen em all up close and personal and this one is for me. I like the smooth texture and harder surface. Herculiner will definitely cut you. .
 
I used the duplicolor spray can stuff too. its like spray on rubbery paint. when it gets scratched up you just spray on more. and would come off easy too, well easier than bedliner. works fine for light duty stuff, like coolers, feet and etc. looks real nice and even textured when clean and fresh.
 
I am going to use something completely different than mentioned so far. I am going to try Hippo Liner from Dominion Sure Seal (Canadian company), a new Urethane paste based protective coating, about $65 per 1/2 gallon. I have aquired one gallon of the stuff, I hope this enough to go from bulkhead to tailgate. I have a friend who owns a NAPA store and we have been talking about bed coatings for months. We are both DIY'ers. After careful investigation, we have decided on this product. Being a NAPA store owner, you can order just about anything and of course you have constant feedback from customers. I will be using a Dominion's "Shutz" Siphon Gun to spray on this bedliner. If you are interested in their application tips, check out http://www.dominionsureseal.com/tips.asp. I'll post pics when I get it done. Right now its to cold in my garage to shoot, so it may be a month or two. I am thinking of tinting the color of the liner from black to my jeep color. As already mentioned, prep is everything.
 
Back
Top