• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

100 day summer rebuild

Happy 19th Birthday!!!! I will have a beer on your behalf if the legal drinking age is still 21 over there;)
 
Oddly enough on my 19th birthday I was over your way Dave, and sadly yes it is 21 here and at 19 they didn't care too much in the beer halls of Germany and your way!!!!
Congrats on the build, keep your nose down and work hard... a few late nights build lasting memories... trust me, we all know how great they are!

cb
 
Day 20:

Pulled the rear-axles
made big parts list
and visited a local guy who built a scrambler...

he put his axles underneath the leaf springs?

Is it safe

IMG_1547_zpsb5d39754.jpg
[/URL][/IMG]
 
Happy birthday Elliot. :birthday:

I wouldn't recomend a spring over when you are going to be towing a trailer. With your tires and lift you really don't need the extra 3 to 4 inches of lift and the center of gravity raised that much. :wave:
 
I was thinking i would do this instead of a lift.... much cheeper and less work

Is it safe to pull a trailer with 33"s and a 3-4 inch lift?

the trailer weighs between 2500-3000 ib?
 
much cheeper and less work

Not at all true. Stay with your plan.

This is one of the biggest screwups people make deciding to do a spring over axle (SOA) setup. Thinking it's as easy as welding on new spring perches and calling it done. Doing this right is at least as expensive and requires more work. Steering and some form of anti-wrap (to stop where the rear axle tries to bend the rear springs into an S-shape) require a lot of effort/thought.

There was an article in JP Magazine not long back stating that they wouldn't do another SOA with spring technology now and all of the hassles it brings.

Keep the springs under and don't look back for what you're doing.
 
Day 21:

So again following the advice of the people with the experience, we have divided NOT to do The spring over axles modification.

The next question, (witch is delaying a large order of parts) is:

What all is the necessary lift needed for 33" tires?

With a 1" body lift?

Also today we:

pulled the front axle and leaf springs
drained the fluid out of all 4 differentials
started on the brake lines
pulled the pitman arm pull and the rest of the steering
 
33 inch tires require a total of 4 inches of lift, 1 inch body and 3 inches suspension. :wave:
 
This is the plan for the lift:

ROUGH COUNTRY 2.5" lift kit
3/4" Shackles lift
1" body lift

also getting a drop pitman arm, but I don't know if i need anything else????
 
That will work. Recommend an "Easy Ride" suspension..:wave:
 
Days 22-26:

One of the leaf springs will not come off!!! the nut is off but the bolt even when i hit the bolt with a sledge hammer it won't slide out the hole???

I think i want to do a full body roll bar, whats the best way to do this?

i bought a ton of stuff:

Alloy One peace wide track axles
2.5 EZ ride tuff county lift kit (no shocks)
chassie saver (supost to be better the pro-15)
A set of (5) 33" cooper tires and rims with 60-70% of the tread left ($650)

Im going to sell the old tires, soft doors and the new rims that come with the 33's

still looking for a full hardtop and a 1" body lift kit

hopefully i will get the springs of tonight and go sandblast!!!

IMG_1560_zps8497cf12.jpg
[/URL][/IMG]

IMG_1561_zpsc3e61111.jpg
[/URL][/IMG]
 
I had a few of those leaf spring bolts not want to come out. That is where I broke out the sawzall. Replace with new ones anyway. Good luck. And the project is coming along.


Dain
 
I had a few of those leaf spring bolts not want to come out. That is where I broke out the sawzall. Replace with new ones anyway. Good luck. And the project is coming along.


Dain

Cut it off, don't hammer on it AT ALL or you will mushroom it... use a punch and push it through... if all else fails, a TON of heat and then just get it done... if not, then cut both sides inside the hanger and drop it and be done with it... grade 8 hardware to replace is cheap money!

cb
 
No kidding. Well said. And Cutting was much easier and faster.


Dain
 
Ditto on the sawzall/grade 8 new bolts !! had the same issue on the CJ.. hacked em off with the sawzall, and didnt even look back
 
Day 27:

i took the frame to the sand blaster on on of the sailboat trailers.... i was (kinda daft)???
cleaned up the shop, made some sawhorses.

the chase saver came in the mail along with the wide track axles

put a buch of stuck un cregslist and ebay.

still need to buy:

1" body lift
gaskets and seals
rear lockers (i don't think i can afford a full set of lockers)
universal joints

Should i try and change the 360 to fuel injection?

photo1_zpsaf91da24.jpg
[/URL][/IMG]

photo2_zpsf2a97fdf.jpg
[/URL][/IMG]
 
I'd get it back together and running first, you can always add fuel injection later.
 
Last edited:
Day 28:

I spent the day with the rander and a wire brush...
i think i am going to paint the axles, drive shaft and engen block red...

still looking for a full hardtop that needs a lot work
what is the story about rear disk brakes
 
Day 28:

what is the story about rear disk brakes

Rear disks may improve brake linearity and fade resistance depending on how they are executed. There are upgrade kits, but most cost as much if not more than buying an axle that already has them.....

All of these choices require a new MC as the proportioning for disks is different.
 
Back
Top