- City
- Dexter
- State
- MI
Day 28:
I spent the day with the rander and a wire brush...
i think i am going to paint the axles, drive shaft and engen block red...
still looking for a full hardtop that needs a lot work
what is the story about rear disk brakes
I'll offer some advice from the time I've spent on mine and watching people on here. I'm not being critical I'm just trying to help and I'm posting rather than sending a PM to help others who may be reading along and planning their own build.
You need to take one day and make a plan of what you're going to do this summer and stick to it. If you're distracted by trying to figure all this out piecemeal you'll either get frustrated fast or spend time and money needlessly.
You are now close to a third of the way through the time you have to get this done and you're finishing the disassembly. That's great but it's much slower going together than coming apart and you have some major time sucks (paint being the largest) left.
IMHO, unless you're willing for this to extend well past the planned time, you should be putting it together essentially how it came apart. The lift is fine with larger tires and basic upgrades that are a part-for-part swap, but when you ask about massive changes like SOA, a 4.0 swap and fuel injecting a 360, I can't help but offer this advice.
Ultimately I want you to enjoy the build, spend time and money wisely and end up where you want. So I'm not trying to be harsh, just trying to help that come to pass.
My
and good luck with whatever you choose to do. Enjoying the thread! 

+1
)