• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

100 day summer rebuild

Day 60:

its as flat as I'm going to get it…

IMG_1736_zpscc73aa90.jpg
[/URL][/IMG]
 
Day 61:

the tub is ready for paint...

but my parents decided to take a 10 day trip to india on the 27 of july!!!!!

so i only have 19 days left!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I'm going to have someone start painting the tub for me tomorrow hopeful i can pick up the rest of the parts form the blasting tomorrow, as for the crossmember ill start on that the day after tomorrow and get the rest of the gas and brake lines installed in the mean time....
 
Day 62:

Sense i no longer have time to spare for painting imaging to take the hit and have a friend of the family paint for around 600$.... however with this new budget I will not be able to aford a full hardtop over $200!!!

If you have a damaged full hardtop that you want to get rid of PM ME!!!

in other news the rest of the parts are back from the blaster

hopefully paint will be read for install by the middle of next week...
photo1_zps5d04a3a9.jpg
[/URL][/IMG]

photo2_zps2b932561.jpg
[/URL][/IMG]

photo3_zps8e2c1e1e.jpg
[/URL][/IMG]

photo4_zpsff58ffe2.jpg
[/URL][/IMG]
 
Still thinking you can do the primer and or flat color route (see earlier posts) and drive it that way for now. :wave:
 
Still thinking you can do the primer and or flat color route (see earlier posts) and drive it that way for now. :wave:

X2 hate to see you rush through a paint job just to stay on a timeline. Even in primer or flat it will turn heads and you will be smiling the entire time
 
Why flat. Single Stage urethane from Eastwoods will fit the bill just the same and last for a very long time. It will go on just as easy and has good fill. I have single stage on my CJ5 for 20 years and all i need to do is apply Armor All paint protector on it each year.
 
Day 63-64:

Well here i am... doing all the things people are telling me not to... :/

i bought epoxy primer and automotive paint

i have a paint booth ready and a professional paint who is a friend of the family who is painting for cheap...

the budget is shot but my father is here for some need insulation....

hopefully things will have a quick turnaround ... the tub is up first....


:/
 
Don't apologize. It's your project. All projects are compromises at some level. Enjoy it, learn it, drive it!

:),
 
Any reason why your not using the stock skid plate?

Sent from my SPH-L900
 
Eliot, not trying to be a d!ck... But those welds are in no way structurally sound. If you were to hit the skid plate while off roading, there is a VERY good chance those welds would fail. I am actually worried about the weight of the drivetrain resting on that cross member.

I say this to EVERYONE who has or wants to get a welder. Take a welding course.
Also, take a fabrication course.

Again, i am not trying to be a d!ck, i am genuinely worried about the integrity of that. I would hate for something to happen that would cause an accident that could damage your Scrambler or hurt someone.
 
Last edited:
Eliot, not trying to be a d!ck... But those welds are in no way structurally sound. If you were to hit the skid plate while off roading, there is a VERY good chance those welds would fail. I am actually worried about the weight of the drivetrain resting on that cross member.

I say this to EVERYONE who has or wants to get a welder. Take a welding course.

Again, i am not trying to be a d!ck, i am genuinely worried about the integrity of that. I would hate for something to happen that would cause an accident that could damage your Scrambler or hurt someone.

I was just looking at the pictures and was thinking the same thing... there is a lot of spatter in what I can see and you really want to make sure you are getting good penetration and clean welds.
If you lose the crossmember, it isn't just losing the crossmember, your driveshafts, transfer case, transmission and engine more than likely will suffer some sort of damage and depending on the speed, you as well in varying forms.

If you are unsure if it is safe, have someone check it out that is certified/qualified.

Better to be safe than sorry.

my $.02

cb
 
Eliot, not trying to be a d!ck... But those welds are in no way structurally sound. If you were to hit the skid plate while off roading, there is a VERY good chance those welds would fail. I am actually worried about the weight of the drivetrain resting on that cross member.

I say this to EVERYONE who has or wants to get a welder. Take a welding course.

Again, i am not trying to be a d!ck, i am genuinely worried about the integrity of that. I would hate for something to happen that would cause an accident that could damage your Scrambler or hurt someone.

Agreed on this 100%. If you want to fab your own, tack it together to ensure it fits, then take it to get professionally welded. You could grind out what you did there, tack it, and take it somewhere. I had the same thought on that not looking sound. Not trying to pile on, but I fear for the safety of that crossmember and what could happen if it lets go at the wrong time (like a good jolt on the highway at speed)
 
Back
Top