• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

10th Annual Scrambler Owner's Association National Scramble - Harlan KY - June 20-23

Sitting at work watching the rain come down... Scramblers are at home on the trailer waiting, ready to go.... Waiting....:rolleyes: I'm sooo ready to go!!!! Come on tomorrow morning! :woot:
 
Scrambler never came off the trailer from last weekend's trip, got a new smoking "Craigslist find" stereo into the bus so we have satellite radio and Pandora for the ride down :headbang:

Loading stuff up tonight and heading out tomorrow morning! :bacon: :headbang: :woot: :smokin:
 
Looong day...
Drove 3.5ish hours to Sarnia (in-laws)
Wheels wont balance with 10oz in them... Added 6oz. Bit better (that took 2 hours)
Checked wheel bearings... Were a bit loose. Decided to repack them. (More time)
CB wouldnt transmit. Tried a spare, didnt work... Bought a new one. All good...
On the way back from buying CB, noticed volt gauge reading less than 12v. Alternator was toast. Connie grabbed one.
just got inside from garage... I want to go to sleep. Been up since 3am. Gonna be a long day tomorrow...
(We will be on channel 8)
ImageUploadedByTapatalk1371603888.655885.jpg


Sent from the future via Skynet computer
 
Well. ....We are here. 10 hours late and without my red Scrambler. We did bring the blue one, now all I have to do is find some sand dunes or a sand drag event .
 
I was going to try to make it but I started a new job recently and I didnt think trying to pull a week of vacation was the thing to do.

Looks like my jeeping this year will on the Sand Dunes... I jealous as hell, ya all have a good time.
 
Well. ....We are here. 10 hours late and without my red Scrambler. We did bring the blue one, now all I have to do is find some sand dunes or a sand drag event .

Just checked to make sure I have my tow strap :rotfl:

At least you're there my friend!!
 
I'm an idiot. Really. Nobody is as big a fool as I.
Good news...My leave is approved and as of about an hour ago I am a free man. I managed to sneak away most of today to pull some services on the heep but I'm not really happy. This is one of those moments where you want to forcefully kick yourself in some tender spot, repeatedly, until you learn. What am I going on about?
My rear drive shaft.
Pay no mind that I don't have a front one. But the rear was supposed to be a temp just to allow me to get it on the boat home from Germany. Well... being a moron I allowed myself to procrastinate getting one ordered and I am pretty dang sure that is going to bite me in the buttocks!
I have been having a pretty bad clacking noise that I wasn't so sure was the shaft and thought maybe it was something bigger in the drive train. Pulled the shaft today and ran it on the lift without it and no noises. Hand spun the t-case and listened and not really anything. Took the shaft to the bench and started to grind away at any of the areas it seems to have been making contact. Did a pretty good job but I think its a little to late. But still being hopeful I reinstalled it and went for a test ride. Yup. Still there and maybe even worse now? So back on the lift and on to other little issues to try and take my mind off it. Filled the trans with fluid (found the rear housing still has a crack!) and the rear diff was pretty low so added to it too. Then found the drivers side front wheel bearings were a little loose so I got at that. The passenger side I did when I changed the ball joints there but never got to the drivers. All better.
So... here is where I show how big a fool I am. I KNOW the drive shaft has issues. But being a glutton for suffering I am going to hit the road tomorrow and create a brand new chapter in a day in the life of an idiot! By me! :) Foolish, stupid...Yeah, probably. But I'm gonna try it and see what happens. Best case I make it and can at least hang out with you guys and then toodle down to Atlanta. Worse case...well, I don't make it. But while I don't have a bear riding shotgun and swilling some cheap beer... I'm a jeeper. We do the impossible that is often seen as the foolish. So... after a trip to my storage for some gear I will be on the road. See you tomorrow evening! :)
 
Im really glad the Postal wasn't on the trailer when you buried the bus and jackknifed the trailer in my yard last weekend!! hope you guys all have a blast at the national.... My youngest boy and my doggies did manage to give a guy and his girlfriend in his new Camaro supercharged convertible fits out on m115 on our way to Frankfort tonight.... it was pretty funny seeing a yellow supercharged Camaro with black wheel trying to get by a mildly built yellow scrambler on 37's with black wheels...... it was fast and loud for sureBIGWALTON STUCK AS SHIT IN MY YARD.JPG
 
DUDE! You Have a HEMTT!!!!!!!!!!!!!!!!!!!!! That's freakin' NUTS! I'd like more on that!!!!!!!!!! :) A2 or A4? details pleasssssse!
 
I'm an idiot. Really. Nobody is as big a fool as I.
Good news...My leave is approved and as of about an hour ago I am a free man. I managed to sneak away most of today to pull some services on the heep but I'm not really happy. This is one of those moments where you want to forcefully kick yourself in some tender spot, repeatedly, until you learn. What am I going on about?
My rear drive shaft.
Pay no mind that I don't have a front one. But the rear was supposed to be a temp just to allow me to get it on the boat home from Germany. Well... being a moron I allowed myself to procrastinate getting one ordered and I am pretty dang sure that is going to bite me in the buttocks!
I have been having a pretty bad clacking noise that I wasn't so sure was the shaft and thought maybe it was something bigger in the drive train. Pulled the shaft today and ran it on the lift without it and no noises. Hand spun the t-case and listened and not really anything. Took the shaft to the bench and started to grind away at any of the areas it seems to have been making contact. Did a pretty good job but I think its a little to late. But still being hopeful I reinstalled it and went for a test ride. Yup. Still there and maybe even worse now? So back on the lift and on to other little issues to try and take my mind off it. Filled the trans with fluid (found the rear housing still has a crack!) and the rear diff was pretty low so added to it too. Then found the drivers side front wheel bearings were a little loose so I got at that. The passenger side I did when I changed the ball joints there but never got to the drivers. All better.
So... here is where I show how big a fool I am. I KNOW the drive shaft has issues. But being a glutton for suffering I am going to hit the road tomorrow and create a brand new chapter in a day in the life of an idiot! By me! :) Foolish, stupid...Yeah, probably. But I'm gonna try it and see what happens. Best case I make it and can at least hang out with you guys and then toodle down to Atlanta. Worse case...well, I don't make it. But while I don't have a bear riding shotgun and swilling some cheap beer... I'm a jeeper. We do the impossible that is often seen as the foolish. So... after a trip to my storage for some gear I will be on the road. See you tomorrow evening! :)




If you get it to Atl and need to work on it I am 30 miles below Atlanta on 85 in newnan and have a drive on lift with welders and everything needed to fix your jeep. I also still have that fan shroud I said you could have almost a year ago. Chris
 
Well... I'm Faked. I'm in some tiny town called Verona Va about 310 miles from Harlan and the drive shaft is pretty much Tango Uniform. FML!
*sigh...deep breath*
So while I gave it the old college try guys I don't see any way I'm gonna make it there...or home. There is very little here, one auto parts shop that I will be surprised if its open tomorrow and wouldn't have what I need to fix my junk anyway. I need a CV joint shaft. And since its late nothing is really open anyway. I tried to call Tom Woods since they are on the west coast but they must close at 5 or 4 or something...Just damn.
I'm to far to make it and way to far to tow truck it back home so I'm down to only one option. Find a hide position and wait til Monday. Try and order a shaft and get it sent here ASAP/overnight. At best that would put me on the road again by maybe thursday? I'd have to decide if driving to altanta is even worth it at that point but I doubt it.
I knew this was a bad idea...good to know I'm still always right. :(
I'm sitting in a McDonalds using their wifi and drinking some coffee. I think there is a KOA near here somewhere so maybe I can limp the jeep there and grab some beer enroute...I freakin' need it. :(
 
Crap. That really stinks. You made it that far? What a trooper. I was planning on trailering mine if I went just to be safe. Good luck tomorrow and getting it fixed.
 
Thanks man... its looking like its gonna be one of those long, expensive lessons. If only I could find a bar with a hot mechanic chick that would take me home...lol!
The rear cv is so close to grenade-ing that I don't want to drive anymore lest I pogo stick myself and kill someone. Add to that the left rear brake adjuster has fallen out so no the brakes are weak. WTH is going on? I must have picked up a hitch hiker named Murphy or something!?!
I'm gonna see if there is a KOA or something around here so I can deploy the tent and try and figure out what to do. And get beer. Nothing productive can happen now anyway so I may as well try and not stress over this. Just figure some kind of plan and hope I can make it work.
Anyone going north through VA with an empty trailer?? ;)
 
Well crap! If I would have made a right and gone north off of 66 I would have made winchester va where a driveshaft shop is! Argh!!!!!!!!!!! Going to try calling them tomorrow and see if they can build one and mail it or ship it here. The shop is about 90 miles north of me. If they can't/won't I'll try Carolina driveshaft. Then work my way west until I find someone that can make me one. I need to go find a camp site and beer!
 
Check out the spa in Raymond's luxury suite...

ImageUploadedByTapatalk1371865060.189238.jpg


Sent from the future via Skynet computer
 
Back
Top