• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

1981 scrambler build 3 link

I need a water jet/plasma/laser table... any one of those three...

:drool:
 
yeah, I COULD get one of those.... but I have no where to put it!

EC118F2BDFFE47A2A3AABC373FBB7D1412057000-1.jpg
 
did some work on my cage in solidworks..... i came up with 2 different styles i like so well see what i go with :thumbsup: still need to add gussets and other tube so don't freak out people lol
IMAG1260-1.jpg

IMAG1256-1.jpg

IMAG1257-1.jpg


sat. early morning i went to work and got a new dash cut out..... what u guys think ???? the center piece part is going to get a few more cut outs......
IMAG1263-1.jpg

IMAG1264-1.jpg

IMAG1265-1.jpg
 
Very nice. Looks like you're using the K4 indicator lights?
 
perhaps lol yes i am....... there not that bad in price... but when u have 14 of them there no so cheap :banghead: lol but its all worth it at the end :bacon:
 
Today I got my Winters Shifter in the mail...... Boy its pretty sexy looken pics up soon :)
 
Bad Karma said:
yeah, I COULD get one of those.... but I have no where to put it!

EC118F2BDFFE47A2A3AABC373FBB7D1412057000-1.jpg
Click to expand...

Sure you do! Check this out!
http://burntables.com/700/cnc-vertical-plasma-router-table/

Nice work as always man.:headbang:

Ive got a similar cage drawn up in bendtech for the wifes Commando.
Its a "family" style cage that doesnt restrict access to the rear seat. I doubled the B pillar hoop for extra support since there will be no X behind the seats.

Dash looks very original as well . . . and that I like!:bacon:
Maybe angle the gauges to the driver a few degrees to make them easier to read?

What are these K4 lights you speak of sir? I know not of this wonder?:shrug::D
Keep the pics coming man!
Later
Sean
 
mike_bfdr said:
perhaps lol yes i am....... there not that bad in price... but when u have 14 of them there no so cheap :banghead: lol but its all worth it at the end :bacon:
Click to expand...


I know what you mean...I have 10 K4 indicators and 10 Carling switches...
 
CJ ATE said:
Sure you do! Check this out!
http://burntables.com/700/cnc-vertical-plasma-router-table/

Nice work as always man.:headbang:

Ive got a similar cage drawn up in bendtech for the wifes Commando.
Its a "family" style cage that doesnt restrict access to the rear seat. I doubled the B pillar hoop for extra support since there will be no X behind the seats.

Dash looks very original as well . . . and that I like!:bacon:
Maybe angle the gauges to the driver a few degrees to make them easier to read?

What are these K4 lights you speak of sir? I know not of this wonder?:shrug::D
Keep the pics coming man!
Later
Sean
Click to expand...

thats a nice table..... just needs a water table for it to cut down the smoke lol

im all over it..... lol heres a pic if i was sitting in the driver seat...... still need to oval the holes a little to make them fit better
IMAG0963-1.jpg

if u see the black things under the gauges those are the angled things from Auto Meter.....
IMAG0966-1.jpg

the K4 indicators lights
17688_1-1.jpg

indicator light on top cut-off switch on bottom
IMAG1243-1.jpg
 
heres the pics of my beautiful shifter..... :headbang: its a new shifter , they just came out with it for the Jeep AW4 & Toyota A340, pretty much the same trans
IMAG1272-1.jpg

IMAG1273-1.jpg

IMAG1274-1.jpg

IMAG1275-1.jpg

IMAG1276-1.jpg
 
That shifter is bad arse! Looks alot like an art carr style shifter.
Thanks for the info on K4 just got off the phone with Tracy at K4 very helpful and fun to BS with!
My hi beam, turn signal, and brake indicator woes are solved!

Diggin the dash more every time I see it!

Keep the pics coming!

Later
Sean
 
You must log in or register to reply here.
Back
Top