• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

1985 cj8 build

driveshaft have arrived!

HOLY GOLD PLATED YOKE!!! awesome!!! :D

LOL. its a HD yoke I picked up for cheap. I plan on painting it black:)
But the UPS guy showed up today and he brought me some
tom wood's driveshafts. I was surprised tom wood's prices beat
my local driveshaft shop. I know he pumps these things out. but I
was surprised to see his prices were cheaper check out the pic below:)
7jeeps7kings

front 2" premium spline shaft with boot, 35.5" polished and clear coated
rear 2" premium spline shaft with boot, 31.25" polished and clear coated with cv joint

DSC01752-1.jpg
 
Last edited:
OOOO those are nice!! I got my rear driveshaft from Tom Woods too... beat my local shop by almost $200!!! will be ordering the front shaft once i flex the suspension and get some measurements.
polished looks pretty sweet!
 
This thread just got totally blingerific in these last few posts!! :D

I think I had an exhaustgasm looking at those welds and all that stainless. :drool:

And I must now have one of them fancified gold yokes. :bow:
 
This thread just got totally blingerific in these last few posts!! :D

I think I had an exhaustgasm looking at those welds and all that stainless. :drool:

And I must now have one of them fancified gold yokes. :bow:

LOL.

here some more for your exhaustgasm.LOL

rear of the jeep:
221-1.jpg


top angled view:
382-1.jpg


zoomed in side view:
44-1.jpg


zoomed out side view:
48-1.jpg


and for the welding pro's. here is a shoot of the flange from the v-clamp welded to the tube:

after welding:
61-1.jpg


after getting cleaned up:
10-1.jpg


more to come.
7jeeps7kings
 
Those welds are a thing of beauty...
 
Okay, I just read all 166 pages in one sitting and I am bookmarking this build for later. Why because what you have done so far is almost exactly what I had in mind for my Jeep when I start my build. Granted I am a youngin so I can't pass on chance to bling up an LS Motor and add a little extra grunt.

Good luck with the rest of the build.
 
Okay, I just read all 166 pages in one sitting and I am bookmarking this build for later. Why because what you have done so far is almost exactly what I had in mind for my Jeep when I start my build. Granted I am a youngin so I can't pass on chance to bling up an LS Motor and add a little extra grunt.

Good luck with the rest of the build.

LOL. thanks for reading. and good luck with your build. At this
time I'm still in the mocking up stage. this build has been slow
but steady. With the mix of money,time, and research it can
really slow you down...LOL. I can understand the Bling, Bling
I might in the future doll the motor up a little. I wouldn't
add any more horse power or torque to this engine the stock
300+hp and 350+ torque is better then anything stock that came
in a cj from the factory. I just can't wait to see the mpg with this
upgraded motor. guys are talking about 20+ mpg with this v8 swap!!
But I'm really going for that OEM look, kind of like it came from the factory.
The cleaner and more simple looking the better.
7jeeps7kings
 
Getting closer. Ha Ha Ha closer to getting towards the middle
of this build!!! lol everything is still in the mock up stage of this build.
and it is still moving along slow but steady(money& time is the cause).
getting ready for the roll cage...
7jeeps7kings


here's an updated picture of how it sits today:

106-1.jpg
 
Is your dog tied to the wieght. If so that is a great idea. I just turned my first wrench on the Scrambler chnging the oil this past weekend. My austrailian/Husky mix was right under there supervising me. He almost got his nose in the oil.

John
 
Is your dog tied to the wieght. If so that is a great idea. I just turned my first wrench on the Scrambler chnging the oil this past weekend. My austrailian/Husky mix was right under there supervising me. He almost got his nose in the oil.

John

I'm sure there is a picture somewhere in this thread of my dog.
And I do some times tie him to a weight. I learned one day
that a 10lbs weight was not enough when he had seen a squirrel
across the yard. the leash and the 10lb weight just dragged behind
him like it was a truck at the truck pulls at the county fair. Well I fixed
that. I added 5 more pounds and that was the end of that! lol.
7jeeps7kings
 
Last edited:
One more question, for now. How much clearence is there between the hood and the top of the intake?

Ben
 
One more question, for now. How much clearence is there between the hood and the top of the intake?

Ben

Ben,

I know it has been some time but I did get a measurement today. From the top of the plastic gm factory cover to the bottom of the hood it's 3".

I also sent a pm.lol
 
update on the wife's cj8 build. It's still moving along.
I don't have any new pic's nothing really to show. but
we did order all new seats front and rear. The wife picked
out bestop trailmax II pro seats. And we have a design down
for the full cage. working out other details, wiring harness,
radiator, heating/ ac unit... I'm looking into an aftermarket
heating/ ac unit but I'm not sure which one to go with?

http://www.nostalgicairparts.com/air-conditioning/id-220-in-dash-heat-air-evaporator-unit-98.php

http://www.summitracing.com/parts/HRA-75-0007/?rtype=10

There's a couple others units that I'm looking
at. Just wondering if anyone is using a custom heating/ ac unit in their jeep. And if
so how do you like it? or would you do anything different?

thanks,
drew (7jeeps7kings)
 
I have a vintage air unit in mine and it works good. Make sure to get the updated version with the servo actuators because they work really well versus the prior versions. Besides, then you can fill in the vent on the cowl and get rid of that too for the "clean" look.
 
The vintage air unit with servo actuators was suggested to me at the scrambler events last year. I'm very interested in getting 1 of these. One plus was that it would take out the interior condensation very well. Second with the cowling sealed up no more raining in on the feet.
 
Getting closer. Ha Ha Ha closer to getting towards the middle
of this build!!! lol everything is still in the mock up stage of this build.
and it is still moving along slow but steady(money& time is the cause).
getting ready for the roll cage...
7jeeps7kings


here's an updated picture of how it sits today:

106-1.jpg

What size tire and rim combo are you running???
 
Back
Top