• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

20 gallon tank cleaning

wm69

Scrambler Junkie
Silver Member
Lifetime Member
City
God's Country
State
AR
Paid for an OEM 20 gal tank several months ago from a guy in Central Arkansas. Finally stopped by to pick it up this weekend.

I already had a 20 gal skid and tank in good condition to eventually put into the Scrambler, but it was missing the little flap/mounting bracket thingy on the passenger side of the skid. I have 20 gal tanks on both of my CJ-7's too. I like the extra capacity and not having to worry about rust.

This tank was cheap, tank appeared to be in good shape, had the getting-hard-to-find strap, rubber mats, and that little bracket I needed, so I grabbed it. From the pics I originally thought the skid would be scrap, but looking at it I think it could be fixed fairly easily by simply welding in some new steel. It's all solid except the middle right in the back where it bolts up.

It was missing the sending unit, but I have a new one of those on the shelf already. Looks like I'm gonna need the big plastic nut that holds the sending unit in place though. Luckily Raymond posts really good pics so I know exactly how it should look when I'm ready to install it!


Gas gauge on my green CJ7 isn't working, so think I"ll clean up this tank, put new lines and the new sending unit in it, and then just swap them out.

Need to get this thing cleaned out though. I can hear debris in there, and it reeks of bad/stale gas.

What's the recipe for plastic OEM tank? BB's and simple green? Chain and water?

Next, when I'm ready to swap one of these into the 85 Scrambler that is currently holding the OEM 15 gal tank, are the vent/fill hoses still unobtainium or has someone started making reproductions? I remember the subject being discussed here in the olden days, but wasn't sure if things ever changed. Hopefully @spankrjs recently looked into this with JA's restoration.....
 

Attachments

  • skid.jpeg
    skid.jpeg
    86.7 KB · Views: 14
  • skid2.jpeg
    skid2.jpeg
    118.3 KB · Views: 14
  • tank.jpeg
    tank.jpeg
    39.3 KB · Views: 14
MTS has the fill and vent hoses.

Cleaning out the plastic tank is easy, it wont have rust in it, only debris from the sending unit. Soap and water are all I have ever used, maybe even leave the hose stuck inside of it running overnight in the back yard.
 
Figured it might have some of the "bad gas goop" in it from sitting a long time with E10 in it. I had a generator that I had to use muriatic acid to eat the goop out of the bottom of the tank. This tank looks like it might have a little goop on the bottom too.
 
I took mine to a local radiator shop - for $20 it came back looking like new.

If you want to replace the seals on the small vapor valves, Crown PN 52018823 worked for me.
Conversely, the big plastic sending unit nut from Crown was worthless - it would skip a thread before it got tight.
 
I've had a sending unit sitting on the shelf for several years. Don't even remember who made it. I did get the fancy brass float for it though! LOL

Thanks for the valve seals. Plan is to clean this one, new lines, new sending unit, so hopefully it doesn't have to be pulled again for a long time.
 
Back
Top